Instruction manual and frequently asked questions - Evolution Wireless Digital (EW-D | EW-DX)

Establishing a radio link | Synchronizing the receiver and transmitter
193
Connecting to the EW-DX EM 2 receiver /
synchronizing the EW-DX EM 2
To establish a radio link between the transmitter and receiver,
we recommend the following procedure.
In order to establish a connection between a receiver and
transmitters of the EW-D series, the devices do not necessar-
ily have to be synchronized with each other.
To successfully connect a receiver and a transmitter, both
devices must have the same frequency range.
Set a free frequency
We recommend using the Auto Setup function, as this is the
most reliable way to identify free frequencies (see „Ch 1 / Ch 2
-> Scan / Auto Setup menu item“).
If you know free frequencies in your area, you can also set the
frequency manually.
▷ EW-DX EM 2: „Ch 1 / Ch 2 -> Frequency menu item“
▷ EW-DX SKM(-S): „Making settings in the menu of the hand-
held transmitter“
▷ EW-DX SK (3-PIN): „Making settings in the menu of the
bodypack transmitter“
Once you have set the same frequency for the desired receiv-
ing channel on the receiver and for the transmitter you want to
connect, the radio link is established.
To ensure that all settings are transmitted to the transmitter,
we recommend synchronizing the transmitter with the receiv-
ing channel.