Instruction manual and frequently asked questions - Evolution Wireless Digital (EW-D | EW-DX)

EW-D ASA antenna splitter
214
Switching the EW-D ASA on and off
To switch on the antenna splitter:
▷ Short-press the STANDBY button.
The antenna splitter switches on and the power LED turns
green.
The RF signals of the connected antennas are distributed to
all connected receivers.
To switch the antenna splitter to standby mode:
▷ Press the STANDBY button for approx. 2 seconds.
The LED turns off. The connected antenna amplifiers are
switched off. Connected receivers are switched off if they
draw their supply voltage from the BNC sockets A1 to A4
(see „Connecting receivers to the EW-D ASA“).
To fully switch off the antenna splitter:
▷ Disconnect the antenna splitter from the power supply sys-
tem by unplugging the power supply unit from the wall
socket.
The LED turns off.