Instruction manual and frequently asked questions - Evolution Wireless Digital (EW-D | EW-DX)

EW-D EM rack receiver
45
The LED is flashing yellow:
▷ The link between the transmitter and receiver is estab-
lished.
▷ The audio signal is overdriven (clipping).
The LED is continuously red:
▷ No link between the transmitter and receiver.
The LED is flashing red:
▷ The link between the transmitter and receiver is estab-
lished.
▷ The battery/rechargeable battery in the paired transmitter
is low.
DATA LED
The DATA LED provides information on the receiver’s Blue-
tooth Low Energy link to the EW-D Smart Assist app and on
the synchronization of transmitters and receivers.
The LED is flashing blue:
▷ The Bluetooth Low Energy link is being established be-
tween the receiver and a smartphone or tablet with the
EW-D Smart Assist app.
or
▷ The receiver is being synchronized with a transmitter.
The LED is continuously blue:
▷ The firmware is being updated.
The LED is off:
▷ Normal operation
▷ There is currently no active data link.