Firmware Release Notes - EW-DX
EW-DX Firmware Update v1.1.3 | 1/1
Evolution Wireless Digital - EW-DX
Firmware Release Notes
Evolution Wireless Digital - EW-DX
EW-DX EM 2
EW-DX SKM | EW-DX SKM-S
EW-DX SK | EW-DX SK 3-PIN
Firmware version 1.1.3 - Release date 2022-11-21
For conformity, consistency and compatibility reasons, we strongly recommend upgrading the sys-
tem to the new release.
Features
• Implementation of AES 256 encryption for the wireless links
• New entries in the receiver’s menu for transmitter configuration:
· Trim
· LED functionality
· Low cut
· Cable emulation
· Auto lock of transmitter buttons
· Sync parameters
The sync parameter menu entry offers the possibility to select which parameters should be
synchronized to the transmitter. If a parameter is deactivated, a change of this parameter
will not be synchronized to the transmitter
• Additional home screen with firmware information of receiver and transmitters (scroll to the
right from home screen)
• Improved bargraph layout
• Bug fix: The link local address was changed after updating the firmware. This bug has been
fixed.
• Other bug fixes and optimizations
Known Issues
• After performing an update, the “Manual” IP mode is not working correctly. Set it to “Auto” once
and then change it back to “Manual” again to fix this.
• The AF peak warning is not displayed in the receiver’s display
Firmware Update
• The EW-DX firmware update requires the Sennheiser Control Cockpit software or the
Sennheiser Wireless Systems Manager software:
www.sennheiser.com/control-cockpit-software
www.sennheiser.com/wsm