604 Instructions for use
604 The cardioid 604 is a dynamic microphone suitable for miking drums, percussions as well as brass and woodwind instruments. The frequency response and cardioid pick-up pattern are optimised for use with snares and toms. The mic has a very high sound pressure handling capability (in excess of 160 dB). The sound inlet basket is made from stainless steel. The integral stand mount screws directly onto mic stands or to the supplied microphone clamp.
Delivery includes y 604 microphone y MZH 604 microphone clamp y Pouch y Instructions for use y Warranty Certificate Pin assignment of XLR-3 connector + + 2 1 3 XLR 2 1 2 + + 2 1 3 3 XLR XLR
Positioning the microphone Drums Position Resulting sound Commentary More fundamental, little overtones Position on the drum: 3–5 cm above the drumskin, the fundamental to overtones ratio can be adjusted by changing the angle of the microphone. The most balanced results are obtained at an angle of 30–60°. Less fundamental, many overtones Use of a second 604 for picking up the bottom of the drumskin and the snares.
Polar diagram ° 30° 30° 5 10 60° 60° 15 20 25 90° dB 90° 120° 120° 150° 150° 125 250 500 1000 180° Hz Hz Hz Hz 2000 4000 8000 16000 Hz Hz Hz Hz Frequency response curve dBv - 40 - 50 - 60 - 70 - 80 - 90 20 50 100 0°, 1 m 4 200 500 1000 2000 0°, 5 cm 5000 10000 20000 Hz
Specifications Transducer principle Frequency response Pick-up pattern Sensitivity (free field, no load) (at 1 kHz) Nominal impedance (at 1 kHz) Min. terminating impedance Connector Operating temperature Dimensions Weight dynamic 40.....18,000 Hz cardioid 1.
Choirs x Studio, acoustic instruments x Orchestra Brass / Saxophone x x x x Acoustic guitar x Acoustic bass x Guitar amplifiers x Bass amplifiers x Leslie x x x Piano, grand piano Kick drums x x Snare drums x x x Rack toms x x x x x x x Floor toms Congas x x Cymbals Percussion Overheads 6 x x x x x x e825 e835 e840 e845 e865 Vocals e815 e614 e608 e606 Application e604 Variant e602-II Overview of microphone applications x x x x x x
Manufacturer declarations Warranty 2 years Approval Sennheiser electronic GmbH & Co. KG declare that this device is in compliance with the applicable CE standards and regulations. Before putting the device into operation, please observe the respective country-specific regulations! WEEE Declaration Please dispose of this product at the end of its operational lifetime by bringing it to your local collection point or recycling centre for such equipment.
Sennheiser electronic GmbH & Co. KG 30900 Wedemark, Germany www.sennheiser.com Printed in Germany Publ.