User Manual

Installing the ASA 214
43
Connectors on the rear of the device
Product overview for the rear side of the ASA 214
1 ANT RF IN B BNC socket
Antenna input of diversity branch B
See “Connecting antennas”
2 RF OUT A BNC socket
RF output only for connecting an additional ASA 214 to build an 8-
channel diversity system
See “Configuring multi-channel systems”
3 DC INsocket
To connect the NT 1-1 power supply unit
See “Connecting/disconnecting the ASA 214 to/from the power sup-
ply system”
4 4 BNC sockets B1 to B4
RF outputs of diversity branch B for connection to the receiver
See “Connecting receivers to the ASA 214”
5 ANT RF IN A BNC socket
Antenna input of diversity branch A
See “Connecting antennas”
6 4 BNC sockets A1 to A4
RF outputs of diversity branch A for connection to the receiver
Every one of these RF outputs can also provide voltage to a receiver.
See “Connecting receivers to the ASA 214”
7 Strain relief for the cable of the power supply unit
See “Connecting/disconnecting the ASA 214 to/from the power sup-
ply system”