User Manual

Using the EM 100 G4
66
Activated pilot tone evaluation
See “Advanced -> Pilot Tone menu item”
7 MUTE muting function
Receiver or transmitter is muted
See “Muting the audio output”
8 Battery status of the transmitter
SKM 100 G4: see “Inserting and removing the batteries/rechargeable
batteries”
SK 100 G4: see “Inserting and removing the batteries/rechargeable
batteries”
9 Lock-off function
Lock-off function is activated on the receiver
See “Lock-off function”
Soundcheck standard display
The Soundcheck standard display shows the transmission quality between
the transmitter and the receiver.
By doing a soundcheck, you can ensure adequate transmission quality in
the entire area in which you want to use the transmitter. You can do the
soundcheck without the help of another person.
With the transmitter, walk up and down the area in which you want to
use the transmitter.
The receiver records the following parameters:
RF Min
Minimum RF signal level
must be well above the squelch threshold level for one of the two anten-
nas
Ways to optimize
Check that the antennas and the antenna cables are correctly connect-
ed.
Improve the position of the antennas.
If necessary, use an antenna booster.