freeport_514013_0808_US
6
SK 2 bodypack transmitter
Inserting/replacing the battery
We recommend powering the bodypack transmitter by a 9 V PP3
alkaline battery (IEC 6 LR 61). If powered by a rechargeable 9 V battery,
the operating time will be drastically reduced.
왘 Open the battery compartment by first sliding the battery
compartment cover in the direction of the arrow. Then flip the
battery compartment cover open.
왘 Insert the battery as shown. Please observe correct polarity when
inserting the battery.
왘 Close the battery compartment.
Note:
When the red LED goes off during operation, you must replace
the battery as soon as possible.
Operating controls
ON/OFF button
Operation and battery status indication, red LED
쐋 Microphone/instrument input,
3.5 mm jack socket (lockable)
Antenna (can be screwed off)
Battery compartment cover
MIC/INST slide switch
Serial number
Channel selector switch CH (1 to 4)
Sensitivity control GAIN
Type plate
Belt clip
freeport_514013_0808_Sp5.book Seite 6 Mittwoch, 26. November 2008 2:16 14