Instruction manual guidePORT 3200 system

Setting up a default project
8-9
Setting up a default project
The following section shortly describes how to set up a simple
project with the following default features:
! You manage all Events of your project in a single location
(location “0”).
! All Events of your project are transmitted via a single cell transmitter
using the streaming method (stationary download).
! You do not work on a network. All software modules are
installed on the same computer.
! Your project has less than 699 Events.
! Your project has no Live Events.
If the features of your project differ from the default features described
above, please refer to the chapter “Configuring the project (detailed
description)” on page 8-15.
Four steps to a default project
1. Setting up a default project
 Make sure that the INM is running in Administrator mode (see
“Changing from Operator mode to Administrator mode” on
page 8-15).
 From the “File” menu, choose “New” or press the key combination Ctrl
+ N or click the “Create new configuration” button ( ) on the toolbar.
The “New project” dialog box appears.
 Click and enter the project folder and the desired name for the
project file.
 In the “Number of categories” field, enter the number of categories
that your project should have.
 In the “Number of Events” field, enter the number of Events that your
project should have.
 Click “Advanced” and, in the “Country code” box, click the option
button for the region for which you are setting up the project.