Instruction manual guidePORT 3200 system

Configuring the project (detailed description)
8-21
Saving a project
The project is always saved automatically when a job using the streaming
method is started.
To manually save the project:
 From the “File” menu, choose “Save” or press the key combination Ctrl
+ S or click the “Save configuration” button ( ) on the toolbar.
The project is saved.
To save the project under a different name (as a backup etc.):
 Make sure that the INM is running in Administrator mode (see
“Changing from Operator mode to Administrator mode” on
page 8-15).
 From the “File” menu, choose “Save as”.
The file selection box opens.
 Enter the file path and name and click “Save”.
The project is saved. The file path of the project file appears on the
status bar. The name of the project appears on the title bar of the
main window.
Closing a project
To close the project
 From the “File” menu, choose “Close”.
The “Confirmation” dialog box opens – provided that you changed the
project but did not save it.
To save the changes made:
 Click “Yes”.
To discard the changes made:
 Click “No”.
All changes made are lost.
Exiting the program
To exit the INM:
 From the “File” menu, choose “Exit”.
The “Confirmation” dialog box opens – provided that you changed the
project but did not save it.