Instruction manual guidePORT 3200 system

The ANM screen
14-11
– If the job is waiting to be executed, “Idle” is displayed.
– If the job has been carrie d out , “OK” is displayed.
– If the job has not been carried, for example because certain cell
transmitters were not switched on or antennas were not connected,
“Error” is displayed.
If you right-click a job on one of the three tabs “Pending”, “Cyclic” or
“Done”, the shortcut menu opens. The commands on the shortcut menu
allow you to add, change or delete jobs etc.
The “Job description” field
In Administrator mode, the “Job description” field provides a detailed
description of the job clicked on one of the index cards
! The “Job name” field displays the name of the job. You specify the
names of scheduled jobs yourself when setting them up. Immediate
jobs are automatically given a name on the pattern
“Immediate_23:59:59”. If a job transmits silence, it is given the
name “Silence”.
! The “Announcement name” field displays the name of the *.wav file to
be transmitted. You assign this name yourself when recording or
importing the wav file.
! The “Frequency” field displays the interval at which the job is repeated
(“Once”, “Hourly”, “Daily”, “Weekly”, “Monthly” or “Yearly”).
! The “Status” field displays the current status of the job (just as on the
tab, see also “The three tabs “Pending”, “Cyclic” and “Done”” on
page 14-10).
! The “Target time” field displays the date and time of the next
execution of the job (just as on the tab, see also “The three tabs
“Pending”, “Cyclic” and “Done”” on page 14-10).
! The “Last info” field displays “OK” if the job was executed without
errors or “Error” if the job was not executed without errors.
! The “Call target” field displays the call target to which the job was
transmitted.
! The two tables in the center display all details on the categories to
which the announcement is addressed:
–The “Category group” column displays the category group defined in
the call target.
– The “Category” column displays all categories belonging to this
category group.
– The “Areas” column displays all areas defined in the call target.
– The “Cells” column displays all cells belonging to the defined areas.
! The bottom table displays all details on the Base Station PCs via which
the announcement is transmitted:
– The “BSM name” column displays the name of the Base Station PC
via which the announcement is transmitted:
– The “Cell transmitter” column displays the CT ID numbers of all cell
transmitters required when the announcement is transmitted.