HD 4.
2 | HD 4.
Contents Contents Important safety instructions....................................................................................2 The HD 4.40BT wireless headphones.........................................................................4 Package includes...........................................................................................................6 Product overview..........................................................................................................
Important safety instructions Important safety instructions XX Read this instruction manual carefully and completely before using the product. XX Always include this instruction manual when passing the product on to third parties. XX Do not use an obviously defective product. XX Only use the product in environments where Bluetooth® wireless transmission is permitted. Preventing damage to health and accidents XX Protect your hearing from high volume levels.
Important safety instructions Intended use/Liability These wireless headphones are designed for use with mobile devices (e.g. mobile music players, mobile phones, tablets) that support wireless communication via Bluetooth. Compatible Bluetooth devices include those that support the following profiles: Hands Free Profile (HFP), Headset Profile (HSP), Advanced Audio Distribution Profile (A2DP), and Audio/Video Remote Control Profile (AVRCP).
The HD 4.40BT Wireless headphones The HD 4.40BT Wireless headphones The HD 4.40BT Wireless headphones offer great sound quality for every day listening on the move. These headphones are the perfect companion for your mobile devices, providing you with unrivalled listening pleasure and easy communication with its long-lasting battery life, and robust, foldable design.
The HD 4.40BT Wireless headphones Bluetooth The headphones comply with the Bluetooth 4.0 standard and are compatible with all Bluetooth 1.1, 1.2, 2.0, 2.1, 3.0 and 4.0 devices with the following Bluetooth profiles: HFP (Hands-Free Profile), HSP (Headset Profile), AVRCP (Audio Video Remote Control Profile) and A2DP (Advanced Audio Distribution Profile). The headphones provide wireless freedom to give hands-free convenience during phone calls or when listening to music.
Package includes Package includes Headphones Carry case Audio cable with 2.5 mm and 3.5 mm jack plug USB charging cable with micro-USB connector Quick guide Quick guide Safety guide Safety guide A list of accessories can be found at www.sennheiser.com. For information on suppliers, contact your local Sennheiser partner: www.sennheiser.com > “Sales Partner“. 6 | HD 4.
Product overview Product overview Overview of the headphones 1 2 3 9 0 5 4 6 7 8 1 Headband 6 Power button 2 Ear pads 7 Multifunction button 3 Ear cups 8 Volume +/- buttons 4 NFC panel 9 Audio input 5 LED 0 Micro-USB input Overview of pictograms Pictograms for pressing a button Pictogram Meaning 1x Press and immediately release the button 2x Press the button twice 5s Press the button and hold for 5 seconds HD 4.
Product overview Pictograms for the LED Pictogram Meaning The LED lights up The intervals signify flashing The LED lights up/flashes continuously The time the LED lights up before blinking 3s Examples of pictograms that may be used in this manual: Pictogram Meaning The LED flashes continuously 5m The LED lights up for 3 seconds, then off, and repeat 3s 2s 2s The LED lights up, then off for 2 seconds, and repeat The LED lights up continuously 1s The LED continuously flashes blue and red per secon
Product overview Overview of the LED indications LED indications during operation LED Meaning The headphones switch on Pairing/connecting with a device is successful The headphones switch off The headphones are disconnected from the device The headphones are outside the Bluetooth range of the device Pairing with a device is unsuccessful The headphones are in pairing mode 1s 2s 2s The device is/devices are successfully cleared from the headphones The headphones are in idle mode (headphones are paired b
Product overview Overview of buttons Power button Press button Function Page Switches the headphones on and off 19 2s Multifunction button Press 1x 2x 2s 10 | HD 4.
Product overview Volume +/- buttons Press 1x Function Page Increases/decreases the volume 19 + - HD 4.
Getting started Getting started Charging basics 2h A complete charging cycle takes about 2 hours. Before using the headphones for the first time, charge the headphones for a complete charging cycle without interruption. When the battery is almost empty or when the headphones are being charged, the LED lights up or flashes as indicated in the following table and a voice prompt announces the charge condition of the battery.
Getting started Charging the headphones 1. Connect the micro-USB plug of the charging cable to the micro-USB input of the headphones. 2. Connect the USB plug to the USB port of your computer. If you are using an external power adapter, connect the USB plug to the power adapter or to the USB car charger adapter, and connect to the power source. The LED flashes/lights up depending on the battery life of the headphones.
Getting started Pairing the headphones CAUTION Danger of malfunction! The transmitted radio waves of mobile phones can impair the operation of sensitive and unprotected devices. XX Only make calls with the headphones in locations where Bluetooth is permitted. The HD 4.40BT Wireless headphones comply with the Bluetooth 4.0 standard.
Getting started Pairing the headphones with a Bluetooth device using NFC The following sections describe, using a smartphone as an example, how to pair your HD 4.40BT Wireless headphones with a Bluetooth device using NFC. If the instructions provided do not work on your device, proceed as described in the instruction manual of the device. You can pair the headphones with other devices using NFC regardless of the headphones’ power state (on or off). 1. Activate NFC on your smartphone. 2.
Getting started Pairing the headphones with a Bluetooth device Ensure that the headphones are within the 20 cm range of your smartphone when performing this procedure. 1. Switch the headphones on (see page 19). –– If you pair the headphones to the device for the first time, they automatically go to pairing mode.
Getting started Disconnecting the headphones from your Bluetooth device XX Deactivate Bluetooth on your smartphone. The headphones are disconnected from the smartphone. The headphones then search for other paired devices. If no device is found, you hear the voice prompt “lost connection”. The headphones go to idle mode. › lost connection ‹ Menu Bluetooth on Bluetooth off HD 4.
Getting started Adjusting the headband For good sound quality and best possible wearing comfort, you can adjust the ear pad location on the headband to properly match the size of your head. Wear the headphones so that the headband runs over the top of your head.
Using the headphones Using the headphones Switching the headphones on WARNING Danger due to high volume levels! Listening at high volume levels for long periods of time can lead to permanent hearing defects. Before putting the headphones on, set the volume to a low level. XX Do not continuously expose yourself to high volume levels. XX XX Press the power button for 2 seconds. You hear the voice prompts “power on” and “connected” and the LED flashes blue 3 times.
Using the headphones Adjusting the volume WARNING Danger due to high volume levels! Listening at high volume levels for long periods of time can lead to permanent hearing defects. Switching between audio sources may cause enormous volume jumps that can permanently damage your hearing. Before putting the headphones on and before switching between audio sources, adjust the volume to a low level. XX Do not continuously expose yourself to high volume levels. XX You can adjust the volume for music and calls.
Playing music Playing music If your audio source supports the aptX® audio codec, the HD 4.40BT Wireless automatically plays music wirelessly in stunning aptX® audio quality. If your audio source does not support aptX®, the HD 4.40BT Wireless plays music in normal audio quality. Pair/connect your headphones with the smartphone, see page 14. XX Play music on your smartphone. The music plays through the HD 4.40BT Wireless headphones. XX HD 4.
Playing music Controlling music playback The following music functions are only available when the headphones and your device are connected via Bluetooth. Some smartphones, music apps or players may not support all functions. Playing/pausing track XX Quickly press the multifunction button. Press Function 1x Plays or pauses music Playing the next/previous track XX Push the multifunction button up or down.
Making calls on the headphones Making calls on the headphones The following call functions are only available if the headphones and smartphone are connected via Bluetooth. Some smartphones may not support all functions. Making a call XX Dial the desired number on your smartphone. If your smartphone does not automatically transfer the call to the headphones, select the HD 4.40BT Wireless as the audio source on your smartphone (see the instruction manual of your smartphone if necessary).
Making calls on the headphones Transferring a call to/from the headphones When a call has been established, you can transfer the call between the headphones and the smartphone. XX Press the multifunction button and hold for 2 seconds. Press Function Transfers a call from the headphones to the smartphone 2s Transfers a call from the smartphone to the headphones Redialing The redialing function must be supported by your smartphone or Bluetooth device (with HFP profile).
Making calls on the headphones Voice control function The voice control function is only supported by Bluetooth smartphones with HFP profile. You can use this function when the headphones are not actively playing music or are used for making calls. 1. Press the multifunction button and hold for 2 seconds. Press 2s Function Voice prompt Starts voice control “voice dialing“ 2. Say your voice command, such as “Call Jane“. The Bluetooth smartphone calls Jane. HD 4.
Using the audio cable Using the audio cable Use the audio cable to listen to music when the headphones are running out of battery or when Bluetooth transmission is restricted or not allowed. The headphones immediately switch off once the audio cable is plugged into the audio input. Inserting the audio cable 1. Insert the 2.5 mm jack plug into the audio input of the headphones. Bluetooth is deactivated. 2. Connect the 3.5 mm jack plug to the audio output of your smartphone. 26 | HD 4.
Care and maintenance Care and maintenance CAUTION Liquids can damage the electronics of the product! Liquids entering the housing of the product can cause a short-circuit and damage the electronics. Keep all liquids away from this product. XX Do not use any solvents or cleaning agents. XX Replacing the ear pads For reasons of hygiene, you should replace the ear pads from time to time. Spare ear pads are available from your local Sennheiser partner. 1.
Care and maintenance Storage and handling To keep the headphones in good condition and to avoid nicks and scratches, fold the ear cups inwards towards the headband and store the headphones in the carry case when not in use or when carrying them around. 28 | HD 4.
Care and maintenance Replacing/removing the rechargeable battery CAUTION Danger of damage to the product! During the warranty period, the rechargeable battery must only be replaced by an authorized Sennheiser service center, otherwise the warranty will be null and void. XX Contact your Sennheiser service center if the rechargeable battery needs to be replaced or removed. To find a Sennheiser service partner in your country, visit www.sennheiser.com.
Troubleshooting Troubleshooting Problem Possible cause Possible solution Page Headphones cannot be switched on Battery is empty Charge the headphones 13 Battery is completely exhausted/worn out Visit an authorized Sennheiser service center for battery replacement No audio signal Headphones are not Check if the headphones paired with your device are paired.
Troubleshooting Leaving the Bluetooth transmission range Wireless calling and streaming are only possible in the Bluetooth transmission range of your smartphone. The transmission range largely depends on environmental conditions such as wall thickness, wall composition etc. With a free line of sight, the transmission range of most smartphones and Bluetooth devices is up to 10 meters.
Specifications Specifications HD 4.40BT Ear coupling Frequency response Transducer principle Sensitivity (microphone) closed, circumaural 18 - 22,000 Hz dynamic 100 - 10,000 Hz Sound pressure level (SPL) Impedance 113 dB (1 kHz/ 1 Vrms) 18 Ω THD (1 kHz, 100 dB) Pick-up pattern Input power < 0.5 % dual omni-directional microphones 3.7 VDC, 600 mAh: built-in rechargeable Lithium-Polymer battery 5 VDC, 400 mA: USB charging 25 hours approx. 2 hours approx. 225 g Lithium Polymer Bluetooth version 4.
Trademarks Trademarks Sennheiser is a trademark of Sennheiser electronic GmbH & Co. KG. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sennheiser electronic GmbH & Co. KG is under license. The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.
Contents 34 | HD 4.
Sennheiser Communications A/S Industriparken 27, DK-2750 Ballerup, Denmark www.sennheiser.com Publ.
