User Guide

24 | HD 4.50BTNC
Making calls on the headphones
Making calls on the headphones
The following call functions are only available if the headphones and smartphone
are connected via Bluetooth. Some smartphones may not support all functions.
Making a call
X
Dial the desired number on your smartphone.
If your smartphone does not automatically transfer the call to the
headphones, select the HD 4.50BTNC Wireless as the audio source on your
smartphone (see the instruction manual of your smartphone if necessary).
Accepting/rejecting/ending a call
If your headphones are connected to a smartphone and you receive a call, you
hear a ring tone in the headphones and the LED flashes blue. If the battery life
of the headphones is low, the LED flashes red.
If you are playing music when you receive a call, the music pauses until you end
the call.
X Press or push the multifunction button accordingly:
Press Function Voice prompt
1x
Accepts a call
Ends a call “call ended”
2
HOLD
1
Accepts an incoming
call and holds the
active call
2s
Rejects a call “call rejected”
2
1
Rejects an incoming
call and continues the
active call
2x
HOLD
Puts the call on hold
2
1
Accepts an incoming
call and ends the
active call
HOLD
2
1
Toggles between
2 active calls