Specifications
Table Of Contents
- Safety instructions
- Intended use of the system
- Operating the EZL 2020-20 L charging case
- Servicing
- Symbols on adhesive labels attached to the EZL 2020-20 L charging case
- Attention! High Volume!
- Safety instructions for Li-poly and NiMH rechargeable batteries and batteries
- Additional safety instructions for the BA 2015 accupack and for batteries
- System components
- Overview of the system
- The operating controls
- SK 2020 D bodypack transmitter
- HDE 2020 D stethoset receiver
- EZL 2020-20 L charging case
- Indications and displays on the transmitter
- Indications and displays on the receiver
- Indications and displays on the charging case
- The functions of the transmitter operating controls
- The functions of the receiver operating controls
- The functions of the operating controls of the charging case
- Putting the components into operation
- Using the components
- The operating menu of the transmitter
- Care and maintenance
- If problems occur...
- Specifications
- Accessoires
- Manufacturer declarations
15
MUTE display
The red LED LOW BATT/MUTE lights up as long as
the transmitter’s microphone input is muted (see
“Muting the transmitter” on page 25).
Note:
The muting function (MUTE) mutes the microphone
input but not the line input .
Lock mode icon
The lock mode icon appears on the LC display when
the lock mode is activated (see “Activating/
deactivating the lock mode” on page 37).
LC display backlighting
After pressing a button, the LC display remains backlit
for approx. 15 seconds.
Display of the energy saving mode
When there is no audio signal for five minutes, the
transmitter automatically switches to energy saving
mode and “CH OFF” appears on the display.
When an audio signal reaches the transmitter, it
switches back to normal operation.
쐋
LINE
CH 03
MIC