Specifications
Table Of Contents
- Safety instructions
- Intended use of the system
- Operating the EZL 2020-20 L charging case
- Servicing
- Symbols on adhesive labels attached to the EZL 2020-20 L charging case
- Attention! High Volume!
- Safety instructions for Li-poly and NiMH rechargeable batteries and batteries
- Additional safety instructions for the BA 2015 accupack and for batteries
- System components
- Overview of the system
- The operating controls
- SK 2020 D bodypack transmitter
- HDE 2020 D stethoset receiver
- EZL 2020-20 L charging case
- Indications and displays on the transmitter
- Indications and displays on the receiver
- Indications and displays on the charging case
- The functions of the transmitter operating controls
- The functions of the receiver operating controls
- The functions of the operating controls of the charging case
- Putting the components into operation
- Using the components
- The operating menu of the transmitter
- Care and maintenance
- If problems occur...
- Specifications
- Accessoires
- Manufacturer declarations
19
LED indication for charging compartments for
BA 2015 accupack/transmitter
Each charging compartment for accupack/trans-
mitter has an LED CHARGE and an LED READY
which indicate the following operating states:
No LED lit:
The charging compartment for accupack/trans-
mitter is ready for operation but empty.
Or:
A transmitter without accupack is placed into the
charging compartment.
Red LED CHARGE lit:
The accupack is being charged.
Green LED READY lit:
The accupack is fully charged and the charging case
has switched to trickle charging.
Green LED READY lights up briefly and then goes
off:
The transmitter is powered by standard batteries
which cannot be recharged.
쐋