Specifications
Table Of Contents
- Safety instructions
- Intended use of the system
- Operating the EZL 2020-20 L charging case
- Servicing
- Symbols on adhesive labels attached to the EZL 2020-20 L charging case
- Attention! High Volume!
- Safety instructions for Li-poly and NiMH rechargeable batteries and batteries
- Additional safety instructions for the BA 2015 accupack and for batteries
- System components
- Overview of the system
- The operating controls
- SK 2020 D bodypack transmitter
- HDE 2020 D stethoset receiver
- EZL 2020-20 L charging case
- Indications and displays on the transmitter
- Indications and displays on the receiver
- Indications and displays on the charging case
- The functions of the transmitter operating controls
- The functions of the receiver operating controls
- The functions of the operating controls of the charging case
- Putting the components into operation
- Using the components
- The operating menu of the transmitter
- Care and maintenance
- If problems occur...
- Specifications
- Accessoires
- Manufacturer declarations
26
Automatically switching the receiver on/off
The receiver automatically switches on when you pull
the earbows apart. When you release the
earbows , the receiver switches to stand-by mode
(audio deactivated) and then switches off after two
minutes.
Switching the charging case on/off
To switch the charging case on:
Set the mains switch to the position “I”.
The LED POWER lights up.
To switch the charging case off:
Set the mains switch to the position “0”.
The LED POWER goes off.
Note:
Unplug the charging case from the mains when not
in use for extended periods of time.