Specifications
Table Of Contents
- Safety instructions
- Intended use of the system
- Operating the EZL 2020-20 L charging case
- Servicing
- Symbols on adhesive labels attached to the EZL 2020-20 L charging case
- Attention! High Volume!
- Safety instructions for Li-poly and NiMH rechargeable batteries and batteries
- Additional safety instructions for the BA 2015 accupack and for batteries
- System components
- Overview of the system
- The operating controls
- SK 2020 D bodypack transmitter
- HDE 2020 D stethoset receiver
- EZL 2020-20 L charging case
- Indications and displays on the transmitter
- Indications and displays on the receiver
- Indications and displays on the charging case
- The functions of the transmitter operating controls
- The functions of the receiver operating controls
- The functions of the operating controls of the charging case
- Putting the components into operation
- Using the components
- The operating menu of the transmitter
- Care and maintenance
- If problems occur...
- Specifications
- Accessoires
- Manufacturer declarations
31
Press the SET button to permanently store the
selected channel.
“STORED” briefly appears on the display. The
transmitter now transmits on the selected channel.
The last menu selected is shown on the display.
To exit the operating menu:
Select the “EXIT“ menu by pressing the / rocker
button and press the SET button .
The standard display is shown.
Or:
Repeatedly press the ON/OFF button until the
standard display is shown.
Setting the receiver channel
In order for the receiver to receive the transmitter
signal, both transmitter and receiver have to be set to
the same channel.
To manually set the receiver channel:
Press the / rocker button for channel
selection .
The selected channel is shown on the channel
display .
If the transmitter is transmitting on this channel,
the receiver’s RF signal indication indicates the
field strength of the received RF signal.
Notes:
y By pressing and holding the / rocker button for
channel selection , the display cycles
continuously (repeat function).
y After channel 6, the display will return to channel 1.
6