Specifications
Table Of Contents
- Safety instructions
- Intended use of the system
- Operating the EZL 2020-20 L charging case
- Servicing
- Symbols on adhesive labels attached to the EZL 2020-20 L charging case
- Attention! High Volume!
- Safety instructions for Li-poly and NiMH rechargeable batteries and batteries
- Additional safety instructions for the BA 2015 accupack and for batteries
- System components
- Overview of the system
- The operating controls
- SK 2020 D bodypack transmitter
- HDE 2020 D stethoset receiver
- EZL 2020-20 L charging case
- Indications and displays on the transmitter
- Indications and displays on the receiver
- Indications and displays on the charging case
- The functions of the transmitter operating controls
- The functions of the receiver operating controls
- The functions of the operating controls of the charging case
- Putting the components into operation
- Using the components
- The operating menu of the transmitter
- Care and maintenance
- If problems occur...
- Specifications
- Accessoires
- Manufacturer declarations
35
Changing the sensitivity of the microphone input
To adjust the sensitivity of the microphone input to
match the connected microphone:
Connect the microphone, position it correctly (refer
to the microphone’s operating manual) and speak
into the microphone as usual.
Press the SET button .
The operating menu appears and the first menu
“CHAN” flashes on the display.
Repeatedly press the / rocker button until
“SENSIT“ flashes on the display and the MIC level
display appears.
Press the SET button .
The current input sensitivity and the MIC level
display appear on the display.
Press the / rocker button to change the
input sensitivity so that the MIC level display
shows full deflection during the loudest passages,
but the yellow LED PEAK never lights up.
Press the SET button to permanently store the
setting.
“STORED” briefly appears on the display, indicating
that the sensitivity of the microphone input has
been stored.
LINE
CH 03
MIC