Specifications
Table Of Contents
- Safety instructions
- Intended use of the system
- Operating the EZL 2020-20 L charging case
- Servicing
- Symbols on adhesive labels attached to the EZL 2020-20 L charging case
- Attention! High Volume!
- Safety instructions for Li-poly and NiMH rechargeable batteries and batteries
- Additional safety instructions for the BA 2015 accupack and for batteries
- System components
- Overview of the system
- The operating controls
- SK 2020 D bodypack transmitter
- HDE 2020 D stethoset receiver
- EZL 2020-20 L charging case
- Indications and displays on the transmitter
- Indications and displays on the receiver
- Indications and displays on the charging case
- The functions of the transmitter operating controls
- The functions of the receiver operating controls
- The functions of the operating controls of the charging case
- Putting the components into operation
- Using the components
- The operating menu of the transmitter
- Care and maintenance
- If problems occur...
- Specifications
- Accessoires
- Manufacturer declarations
39
The operating menu of the
transmitter
Working with the transmitter’s operating menu
To get into the operating menu:
Make sure that the lock mode is deactivated (see
“Activating/deactivating the lock mode” on
page 37).
Press the SET button .
The operating menu appears and the first menu
“CHAN” flashes on the display.
To select a menu:
Repeatedly press the / rocker button until
the desired menu flashes on the display.
Press the SET button .
To change a menu:
Press the / rocker button .
To store a setting:
Press the SET button .
To exit the operating menu:
Note:
If you do not press a button for more than 30
seconds, the transmitter automatically returns to
the standard display.
Select the “EXIT“ menu by pressing the / rocker
button and press the SET button .
The standard display is shown.
Or:
Repeatedly press the ON/OFF button until the
standard display is shown.