Specifications

FURMAN
HA-6AB
HEADPHONES
658
EQUIPMENT LEASING AVAILABLE
PHOTO - VIDEO - PRO AUDIO
Headphone/Monitor Amplifier
The HA-6AB is an economical 20
watt per channel stereo amplifier.
However, unlike a conventional
power amp, it has six headphone
outputs (stereo phone jacks) on the
front panel, each with volume control. When used for overdubbing or rehearsal, this provides more than adequate loudness
in all headphones (even older low-impedance models), and allows each musician to set his or her own comfortable volume
level. When the overdubbing is complete and the musicians remove their headphones, the HA-6AB can power the tape
playback through either (or both) of two sets of studio monitor speakers.
◆ Combination headphone amp and a con-
ventional power amp—powers headphones
and
speakers for added space/cost-savings.
◆ Utilizes an efficient toroidal power trans-
former for silent operation and low magnet-
ic leakage,
◆ Tw o balanced XLR and two unbalanced 1/4"
phone inputs
◆ 6 headphone outs,each with volume control
◆ With 20 watts-per-channel the HA-6AB can
drive headphones of any impedance to their
full rated listening level, and do so with
minimal noise and distortion.
◆ Just right for the small “cube” reference
speakers used in most recording studios as a
comparison with the main control room
monitors—the HA-6AB powers them with-
out overpowering them.
◆ Convenient front panel input level control.
◆ Switches for two sets of speakers
◆ Automatically switches to mono mode when
right channel is not used
◆ Overload and signal-present LEDs for each
channel; ground lift,power-on indicator
◆ Provision for remotely controlling volume
◆ Fully protected against thermal overload,it
can also withstand a short circuit on any or
all outputs for an indefinite time without
damage.
Optional HR-2
Headphone Remote Station
Designed for the HA-6A,the HR-2 is a com-
pact, unobtrusive box that clamps to a mike
stand or belt, providing two headphone jacks,
each with its own volume control.Any num-
ber of HR-2 stations may be connected to a
HA-6A using standard mic cables.Comes with
snap-on, snap-off mike stand clamp.
HDS-6 / HR-6
Headphone Audio Distribution System and Remote Mixer
The HDS-6 with the HR-6 offers a
great-sounding, cost effective and
flexible way to provide custom mixes
for up to sixteen people in recording
and live sound environments. The
combination of unique functions add unprecedented functionality and convenience to
any multiple-user audio application.
The system consists of two components: the rackmount HDS-6 Audio Distribution
System, and one or more HR-6 remote mixers. Linking them is as easy as plugging in
cables — multiple HR-6’s are simply daisy-chained together. A pair of 25-foot linking
cables is included with each HR-6. For applications where daisy-chaining is not
practical, a twelve port or larger ethernet patch panel can be wired to allow multiple
HR-6 units to connect from a central location. Up to eight HR-6 remote mixers can be
linked to an HDS-6, and two pairs of headphones may be plugged into each HR-6.