User Guide
Table Of Contents
- Contents
- Replacement parts
- WARNING
- The RS 160 digital RF headphone system
- Delivery includes
- Product overview
- Putting the RS 160 into operation
- Using the RS 160
- 1. Make sure that the rechargeable batteries are charged.
- 16
- –
- 18
- 20
- 21
- Switching the transmitter on and off
- Switching the headphones on and off
- Adjusting the volume on the headphones
- Muting the headphones
- Adjusting the signal of the sound source
- Associating the headphones to the transmitter
- Listening with several headphones simultaneously
- Cleaning the RS 160
- If a problem occurs ...
- Accessories and spare part
- Specifications
- Manufacturer declarations
Putting the RS 160 into operation
14 | RS 160
Inserting rechargeable batteries/standard batteries into the transmitter
and changing them
왘 Power the TR 160 transmitter either with rechargeable batteries (AA
size, NiMH, 1.2 Vat least 1,300 mAh) or standard batteries (AA size,
1.5 V).
왘 Open the battery compartment at the base of the transmitter as
shown.
왘 Remove the depleted rechargeable batteries or batteries (where
applies).
왘 Insert the rechargeable batteries or batteries. Observe correct polarity.
왘 Close the battery compartment.
The cover locks into place with an audible click and the transmitter
switches on. The multi-function LED 햳 flashes green after 9 seconds.
The transmitter is in enrollment mode.
1s