User Guide
Table Of Contents
- Contents
- Replacement parts
- WARNING
- The RS 160 digital RF headphone system
- Delivery includes
- Product overview
- Putting the RS 160 into operation
- Using the RS 160
- 1. Make sure that the rechargeable batteries are charged.
- 16
- –
- 18
- 20
- 21
- Switching the transmitter on and off
- Switching the headphones on and off
- Adjusting the volume on the headphones
- Muting the headphones
- Adjusting the signal of the sound source
- Associating the headphones to the transmitter
- Listening with several headphones simultaneously
- Cleaning the RS 160
- If a problem occurs ...
- Accessories and spare part
- Specifications
- Manufacturer declarations
RS 160 | 15
Putting the RS 160 into operation
Powering the headphones
For powering the headphones, you can use:
• standard batteries (AAA size, 1.5 V)
• rechargeable batteries (AAA size, NiMH, 1.2 V)
If you use rechargable batteries, you can charge them in the headphones
using the charging cable 햻 (see next chapter).
Inserting rechargeable batteries/standard batteries into the
headphones and changing the rechargeable batteries/standard
batteries
왘 Remove the ear pads 쐇 from both ear cups by turning the ear pads in
the d
irection of the arrow until you overcome a slight resistance.
왘 Lift the ear pads 쐇 off the ear cups.
왘 Remove the depleted rechargeable batteries or batteries (where
applies).
왘 Insert the rechargeable batteries or batteries. Observe correct polarity.
왘 Secure the ear pads 쐇 to the ear cups.
쐇
쐇