User Guide
Table Of Contents
- Contents
- Replacement parts
- WARNING
- The RS 160 digital RF headphone system
- Delivery includes
- Product overview
- Putting the RS 160 into operation
- Using the RS 160
- 1. Make sure that the rechargeable batteries are charged.
- 16
- –
- 18
- 20
- 21
- Switching the transmitter on and off
- Switching the headphones on and off
- Adjusting the volume on the headphones
- Muting the headphones
- Adjusting the signal of the sound source
- Associating the headphones to the transmitter
- Listening with several headphones simultaneously
- Cleaning the RS 160
- If a problem occurs ...
- Accessories and spare part
- Specifications
- Manufacturer declarations
Using the RS 160
18 | RS 160
Using the RS 160
To switch the product on and to listen to your sound source, proceed as
follows:
Switching the transmitter on and off
Switching the transmitter on
왘 Press the multi-function button 햲 for approx. 1 second.
The transmitter switches on. The multi-function LED 햳 flashes green,
indicating that the transmitter is in enrollment mode.
Once the transmitter has found suitable headphones, it pairs with the
headphones and transmits an audio signal. The multi-function LED 쐊
of the headphones and the multi-function LED 햳 of the transmitter
flash slowly.
Sequence of steps Page
1. Make sure that the rechargeable batteries are charged. 16
2. Switch your sound source on. –
3. Switch your transmitter on. 18
4. Switch your headphones on. 20
5. Adjust the desired volume. 21
1s
5s
2
1
쐊