User Guide
Table Of Contents
- Contents
- Replacement parts
- WARNING
- The RS 160 digital RF headphone system
- Delivery includes
- Product overview
- Putting the RS 160 into operation
- Using the RS 160
- 1. Make sure that the rechargeable batteries are charged.
- 16
- –
- 18
- 20
- 21
- Switching the transmitter on and off
- Switching the headphones on and off
- Adjusting the volume on the headphones
- Muting the headphones
- Adjusting the signal of the sound source
- Associating the headphones to the transmitter
- Listening with several headphones simultaneously
- Cleaning the RS 160
- If a problem occurs ...
- Accessories and spare part
- Specifications
- Manufacturer declarations
RS 160 | 19
Using the RS 160
Switching the transmitter off
왘 Press the multi-function button 햲 for approx. 1 second.
The multi-function LED 햳 goes off. The transmitter is in standby mode.
To disconnect the transmitter from the mains:
왘 Pull out the mains plug from the wall socket.
If the headphones are outside the transmission range or switched
off for more than 5 minutes, the transmitter automatically switches
to standby mode. The multi-function LED 햳 goes off. In standby
mode, the transmitter’s power consumption is very low so that it
can remain connected to the mains.