User Guide
Table Of Contents
- Contents
- Replacement parts
- WARNING
- The RS 160 digital RF headphone system
- Delivery includes
- Product overview
- Putting the RS 160 into operation
- Using the RS 160
- 1. Make sure that the rechargeable batteries are charged.
- 16
- –
- 18
- 20
- 21
- Switching the transmitter on and off
- Switching the headphones on and off
- Adjusting the volume on the headphones
- Muting the headphones
- Adjusting the signal of the sound source
- Associating the headphones to the transmitter
- Listening with several headphones simultaneously
- Cleaning the RS 160
- If a problem occurs ...
- Accessories and spare part
- Specifications
- Manufacturer declarations
Using the RS 160
20 | RS 160
Switching the headphones on and off
Switching the headphones on
왘 Press the multi-function button 쐄 for approx. 1 second.
The headphones switch on. The multi-function LED 쐊 flashes green,
indicating that the headphones are in enrollment mode.
Once the headphones have found a suitable transmitter, the
transmitter pairs with the headphones and transmits an audio signal.
The multi-function LED 쐊 of the headphones and the multi-function
LED 햳 of the transmitter flash slowly.
Switching the headphones off
왘 Press the multi-function button 쐄 for approx. 1 second.
The mu
lti-function LED 쐊 goes off. The headphones are in standby
mode.
WARNING Danger due to high volumes!
Listening at high volume levels for long periods can lead to
permanent hearing defects.
왘 Before putting the headphones on, set the volume to a low
level.
왘 Do not continuously expose yourself to high volumes.
1s
5s
If there is no signal from the transmitter for more than 5 minutes,
the headphones automatically switch to standby mode.
쐄
2
쐊