User Guide
Table Of Contents
- Contents
- Replacement parts
- WARNING
- The RS 160 digital RF headphone system
- Delivery includes
- Product overview
- Putting the RS 160 into operation
- Using the RS 160
- 1. Make sure that the rechargeable batteries are charged.
- 16
- –
- 18
- 20
- 21
- Switching the transmitter on and off
- Switching the headphones on and off
- Adjusting the volume on the headphones
- Muting the headphones
- Adjusting the signal of the sound source
- Associating the headphones to the transmitter
- Listening with several headphones simultaneously
- Cleaning the RS 160
- If a problem occurs ...
- Accessories and spare part
- Specifications
- Manufacturer declarations
Using the RS 160
26 | RS 160
Listening with several headphones simultaneously
By default, the transmitter is set to single-user operation. In order to be
able to listen to your sound source with several headphones
simultaneously, you have to set your transmitter to multi-user operation.
왘 Make sure that all headphones are paired to the transmitter (see
previous chapter).
왘 Switch all headphones on (see page 20).
왘 Then switch the transmitter on (see page 18).
왘 Briefly press the multi-function button 햲 of the transmitter.
The multi-function LED 햳 of the transmitter and the multi-function
LEDs 쐊 of the headphones flash green. You can now listen to your
sound source with several headphones simultaneously.
5s
When pressing the transmitter’s multi-function button 햲 in
multi-user operation, the transmitter switches to single-user
operation. You can still listen to your sound source with the last
headphones paired, the other headphones are disconnected from
the transmitter.
H
D
R
1
6
0
H
D
R
1
6
0
H
D
R
1
6
0