User Guide
Table Of Contents
- Contents
- Replacement parts
- WARNING
- The RS 160 digital RF headphone system
- Delivery includes
- Product overview
- Putting the RS 160 into operation
- Using the RS 160
- 1. Make sure that the rechargeable batteries are charged.
- 16
- –
- 18
- 20
- 21
- Switching the transmitter on and off
- Switching the headphones on and off
- Adjusting the volume on the headphones
- Muting the headphones
- Adjusting the signal of the sound source
- Associating the headphones to the transmitter
- Listening with several headphones simultaneously
- Cleaning the RS 160
- If a problem occurs ...
- Accessories and spare part
- Specifications
- Manufacturer declarations
RS 160 | 33
Manufacturer declarations
The declaration is available at www.sennheiser.com.
Before putting the product into operation, please observe the respective
country-specific regulations!
Statements regarding FCC and Industry Canada
This device complies with Part 15 of the FCC Rules and with RSS-210 of
In
dustry Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to this equipment not expressly approved
by Sennheiser electronic Corp. may void the FCC authorization to operate
this equipment.
CAN ICES-3 (B)
SENNHEISER
Model No: TR 160, HDR 160
FCC Declaration of Conformity (DoC)
We,
Sennheiser Electronic Corporation
One Enterprise Drive • Old Lyme •
CT 06371 • USA
Tel: +1 (860) 434 9190
Fax: +1 (860) 434 1759
declare the above device comply with the requirements of Federal Communications Commission.
This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
Responsible Party: Greg Beebe