ME 34 ME 35 ME 36 Instruction manual
ME 34, ME 35, ME 36 microphone heads ME 34, ME 35, ME 36 microphone heads The ME 34, ME 35 and ME 36 are pre-polarized condenser microphone heads for use with the Sennheiser MZH goosenecks. The microphone heads are designed for conference, public address and studio applications.
Connection possibilities Connection possibilities 왘 To create an intact bond, make sure that you screw the microphone tightly onto the gooseneck. ME 34 ME 36 MZH 30xx ME 35 A list of accessories can be found on the ME 34/ME 35/ ME 36 product page at www.sennheiser.com. For information on suppliers, contact your local Sennheiser partner: www.sennheiser.com > “Service & Support“.
Specifications Specifications ME 34 ME 35 ME 36 Frequency response 40 Hz – 20 kHz 50 Hz – 20 kHz 40 Hz – 20 kHz Acoustic operating principle pressure gradient transducer pressure gradient transducer pressure gradient transducer/ interference tube transducer Pick-up pattern cardioid super-cardioid super-cardioid/ lobar Sensitivity 10 mV/Pa 10 mV/Pa 18 mV/Pa Electrical impedance 50 Ω 50 Ω 50 Ω Min.
Manufacturer Declarations Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner. In compliance with the following requirements: • RoHS Directive (2002/95/EC) • WEEE Directive (2002/96/EC) CE Declaration of Conformity • EMC Directive (2004/108/EC) The declaration is available at www.sennheiser.com.
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Germany, Publ.
