HMD 46 HME 46 HME 46-3S Instruction manual
Safety instructions • Please read this instruction manual carefully and completely before using the headset. • Make this instruction manual easily accessible to all users at all times. • Always include this instruction manual when passing the headset on to third parties. • The headset is capable of producing sound pressure levels exceeding 85 dB(A). In many countries 85 dB(A) is the maximum legally permissible level for continuous noise exposure during the working day.
Intended use of the headset Intended use includes: • having read this instruction manual especially the chapter “Safety instructions”. • using the headset within the operating conditions as described in this instruction manual. Improper use Improper use means using the headset other than as described in this instruction manual, or under operating conditions which differ from those described herein.
HMD 46 / HME 46 / HME 46-3S The HMD 46 / HME 46 / HME 46-3S headset features dynamic, open headphones. The noise-compensating microphone ensures excellent speech transmission even in noisy environments. Designed for air traffic control, intercom systems and other communication purposes.
Operation Putting on the headset When putting on the headset, the patented two-piece headband adjusts automatically. Flipping away one ear cup The headset features a “flip-away” ear cup for singlesided listening.
Positioning the microphone Bend the flexible microphone boom so that the microphone is placed at the corner of the mouth. Maintain a distance of 2 cm between microphone and mouth. Turning the microphone boom The microphone boom can be rotated. This allows the headset to be worn with the microphone boom positioned on either the left or right-hand side of the head.
Adjusting the volume directly on the audio system CAUTION! Hearing damage due to high volumes! This headset is capable of producing high sound pressure levels. Higher volumes or longer durations can damage your hearing! 왘 Set the volume to a medium level. Make sure that you can hear critical sounds such as warning alarms. Connect the headset to the corresponding sockets of your audio system. Adjust the volume directly on the audio system.
Care and maintenance Cleaning the headset CAUTION! Liquids can damage the product! Liquids entering the product can short-circuit the electronics or damage the mechanics. Solvents or cleansing agents can damage the surface of the product. 왘 Keep all liquids far away from the product. 왘 Before cleaning, pull out the plugs of the product from the connections in the aircraft. 왘 Only use a soft, dry cloth to clean the product.
Accessories and spare parts By changing the cable, you can simply retrofit your headset (see “Product variants” on page 10). Accessories • • • • • • • • • • • • • • 8 Cable -6 Cable -7 Cable -H-6 Cable -H-6-1 Cable -L Cable -PTT-6 Cable -PTT-6-1 Cable -PTT-H-PJ7-10 Cable -PTT-H-PJ7-15 Cable -PTT-H-PJ7-25 Cable -PTT-L Cable -PTT-LA Cable D-3PTT-M Hygiene pads HZH 46, 200 pairs Cat. No. 500836 Cat. No. 502360 Cat. No. 502533 Cat. No. 502832 Cat. No. 502365 Cat. No. 500844 Cat. No. 502418 Cat. No.
Spare parts • Headband padding, 1 pair • Ear pads, 1 pair • Ear pads, 100 pairs • Wind and pop screen for BKE 46, 1 item • Wind and pop screen for BKE 46, any number of items • Wind and pop screen for BMD 46, any number of items • Cable clip HZC 08 • Cable clip HZC 09 Cable clips HZC 08 HZC 09 (for round cables) (for flat cables) 9
Product variants Variant (Cat. No.) Description HMD 46-3 (500849) HMD 46-31 (502483) Single-sided round cable – Headsets with dynamic microphone – HMD 46-3-6 (500466) with open ends, length 1.85 m HME 46-3 (500857) – HME 46-31 (502484) – HME 46-3-6 (500467) with open ends, length 1.85 mm HME 46-3PTT-6 (500468) with PTT button and open ends, Headsets with con- length 1.85 m denser microphone HME 46-3PTT-LA with LEMO connector (502172) FHG.2B.310.CLAD52Z, length 2.
Cable and connector assignment Headset connector Lato saldato white orange brown green Audio Hi left Audio Hi right Audio Lo left Audio Lo right yellow red blue Screen not assigned Microphone Hi Microphone Lo Screen Cable -6 approx. 1.
Cable -H-6 stretched approx. 3 m white orange brown green Audio Hi left Audio Hi right Audio Lo left Audio Lo right red blue Screen Microphone Hi Microphone Lo Screen white orange brown green Audio Hi left Audio Hi right Audio Lo left Audio Lo right red blue Screen Microphone Hi Microphone Lo Screen Cable -H-6-1 stretched approx.
Cable -PTT-6 approx. 1.5 m approx. 0.3 m approx. 1.85 m white orange brown green yellow black red blue Screen Audio Hi left Audio Hi right Audio Lo left Audio Lo right PTT PTT Microphone Hi Microphone Lo Screen white orange brown green yellow black red blue Screen Audio Hi left Audio Hi right Audio Lo left Audio Lo right PTT PTT Microphone Hi Microphone Lo Screen Cable -PTT-6-1 approx. 0.8 m approx. 1 m approx. 1.
Cable -3PTT-LA 1 2 3 6 7 4 8 9 10 5 5 6 4 1 7 3 2 8 9 10 Solder side Audio Hi right Audio Lo right PTT PTT / screen/ bridge to pin 9 Audio Hi left Audio Lo left Microphone Hi approx. 2.
Cable -PTT-H-PJ7-xx xx = 10 / 15 / 25 2 24 6 switch position 1 CANADIAN ATC INTERNATIONAL ATC 13 5 stretched approx. 3.0 / 4.5 / 7.6 m approx. 1.1 m stretched approx. 10 / 15 / 25 ft. approx. 3.6 ft.
Specifications HMD 46-3 and HMD 46-31 Headphones Transducer principle dynamic, open Ear coupling supra-aural Frequency response 20–14,000 Hz Impedance 300 Characteristic SPL at 1 kHz, 1 mW, mono at 1 kHz, 1 V 95 dB SPL HMD 46-3: HMD 46-31: 83 dB SPL 103 dB SPL THD (350–3,000 Hz) < 1% at 95 dB SPL Contact pressure approx. 3 N Microphone Type BMD 46-413 Transducer principle dynamic, noise-compensating Frequency response 100–12,000 Hz Output voltage 0.
HME 46-3, HME 46-31 and HME 46-3S Headphones Transducer principle dynamic, open Ear coupling supra-aural Frequency response 20–14,000 Hz Impedance 300 Characteristic SPL HME 46-3/HME 46-31: 95 dB SPL at 1 kHz, 1 mW, mono HME 46-3S: 98 dB SPL at 1 kHz, 1 V HME 46-3: HME 46-31: HME 46-3S: 83 dB SPL 103 dB SPL 97 dB SPL THD (350–3,000 Hz) HME 46-3/HME 46-31: < 1% at 95 dB SPL HME 46-3S: < 1% at 98 dB SPL Contact pressure approx.
HME 46-DCN Headphones Transducer principle dynamic, open Ear coupling supra-aural Frequency response 20–14,000 Hz Impedance 300 Characteristic SPL 95 dB SPL at 1 kHz, 1 mW, mono 103 dB SPL at 1 kHz, 1 V Max. SPL > 125 dB SPL at 1 kHz THD (350–3,000 Hz) < 1 % at 110 dB SPL Contact pressure approx. 3 N Microphone Type BKE DCN Transducer principle pre-polarized condenser microphone Pick-up pattern cardioid Frequency response 100–15.000 Hz Output voltage 10 mV/Pa Impedance min.
Manufacturer declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner. In compliance with the following requirements • RoHS Directive (2002/95/EC) CE Declaration of Conformity • EMC Directive (2004/108/EC) The declaration is available at www.sennheiser.com.
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Germany, Publ.
