Datasheet

Cat. No. 009862
HSP 2
Microphones | Headset Microphones
General Description
High-quality permanently polarized condenser headmic with omni-direc-
tional pick-up pattern, designed for professional “hands free” applications.
The adjustable neckband is visually unobtrusive and very comfortable to
wear. The six available HSP 2 variants differ in colour and connector.
Technical Data
Pick-up pattern ........................................................ omnidirectional
Frequency response .................................................. 20...20 000 Hz
Nominal impedance ...........................................(@ 1 kHz) 1000 ⍀
Min. terminating impedance ................................................4700 ⍀
Sensitivity
(free field, no load) (1kHz) ................................................ 2 mV/Pa
Maximum sound pressure level (passiv) ............................150 dB
Equivalent noise level ......................................................... 28 dB(A)
Current consumption ........................................................ca. 250 µA
Operating voltage (stand alone) ....................................... 4,5-15 V
Cable length ................................................................1.6 m (5.25 ft)
Diameter ................................ microphone head Ø 4.8 mm (0.19˝)
Diameter ..................................................boomarm 1.1 mm (0.04˝)
Weight (without cable) ............................................6.5 g (0.23 oz)
Product Variants

HSP 2 Headmic (condenser, omni-directional),
very thin, very strong OFC copper/Kevlar
connection cable with 3-pin lockable special
connector SK 50, SK 250, SK 5012 and SK 3063
bodypack transmitters, colour: anthracite Cat. No. 009862

HSP 2-3 as HSP 2, but beige Cat. No. 009863

HSP 2-5 as HSP 2, but with open-ended steel wire cable Cat. No. 009868

HSP 2-5-3 as HSP 2-5, but beige Cat. No. 009869

HSP 2-EW as HSP 2, but with steel wire cable and
3.5 mm (1/8˝) lockable mini-jack for connection to
evolution wireless Series bodypack transmitters. For
wired applications, the HSP 2-EW can be used with
the intelligent MZA 900 P phantom power adaptor. Cat. No. 009866

HSP 2-EW-3 as HSP 2-EW, but beige. Cat. No. 009866
Features

Individually adjustable to all head sizes

Neckband design keeps the microphone clear from shirt-collar or clothing

Extremely thin microphone boom (Ø 1.1 mm / 0.04˝), can be attached
to the left or right side

Microphone boom is adjustable in length and angle

Patented Umbrella Diaphragm protects the microphone against sweat

Connection cable can easily be interchanged

All metal parts coated in a physical vapour deposition process

Can also be used with the cardioid HSP 4 boom microphone

Delivery includes: Boom microphone, Neckband, Connection cable,
Plastic transport case, foam-lined with cut-outs,
Caps for altering the frequency response,
Operating instructions
Recommended Accessories

Neckband, anthracite Cat. No. 511709

Neckband, beige Cat. No. 511710

Omni-directional boom microphone, beige Cat. No. 511711

Omni-directional boom microphone,
anthracite Cat. No. 511712

Cardioid boom microphone, beige Cat. No. 511713

Cardioid boom microphone, anthracite Cat. No. 511714

Cap for HSP 2, short, anthracite MZC 2-1 Cat. No. 085842

Cap for HSP 2, long, anthracite MZC 2-2 Cat. No. 085839

Cap for HSP 2, short, beige MZC 2-1 Cat. No. 085843

Cap for HSP 2, long, beige MZC2-2 Cat. No. 085840

OFC copper/Kevlar cable with
3-pin connector, black Cat. No. 511717

OFC copper/Kevlar cable with
3-pin connector, beige Cat. No. 511718

Steel wire cable with 3.5 mm (1/8˝)
lockable mini-jack, black Cat. No. 511719

Steel wire cable with 3.5 mm (1/8˝)
lockable mini-jack, beige Cat. No. 511720

Steel wire cable with open ends, black Cat. No. 511721

Steel wire cable with open ends, beige Cat. No. 511722

Plastic transport case Cat. No. 511723

Phantom power adaptor for wired
applications MZA 900 P Cat. No. 500226

Windshield, anthracite MZW Cat. No. 047185

Windshield, beige MZW Cat. No. 047186