Product specification

Cat. No. 003279
K6
Microphones | Powering Module
General Description
The K6 powering module is the heart of this Sennheiser professional modu-
lar microphone system and can be powered either by its internal ‘AA’ size
1.5 V battery or by 12 – 48 V phantom power. The K6 can be combined
with different condenser microphone heads to provide a wide variety of
polar patterns. Matt black, anodised scratch-resistant finish.
Features
j
Switchable bass roll-off filter protects against rumble, handling,
pop and wind noise
j
On/off switch with battery test
j
High output, low noise
j
Transformerless balanced output on 3-pin XLR connector
j
Delivery includes: 1 K6 powering module
1 MZQ 200 microphone clamp
1 AA battery
1 protective carrying case
Recommended Accessories
j
ME 62 microphone head, omni-directional Cat. No. 003281
j
ME 64 microphone head, cardioid Cat. No. 003282
j
ME 65 microphone head, super-cardioid Cat. No. 003283
j
ME 66 microphone head, short gun Cat. No. 003284
j
ME 67 microphone head, long gun Cat. No. 003285
j
MKE 2-60 Gold-C clip-on microphone, omni-directional Cat. No. 004733
j
ME 102/104/105 mini-modular system
j
MZS 6 shock mount Cat. No. 003287
j
MZQ 6 quick release clamp Cat. No. 003288
Product Variants
j
K6-C: as K6, but without accessories Cat. No. 003861
j
K6-CL: as K6-C, but with lower sensitivity Cat. No. 004032
Profile
Powering module for battery/phantom powering with
switchable roll-off filter, battery on/off switch with battery
test. Suitable for ME 62 – ME 67 microphone heads and -60
versions of MKE microphones. Transmission factor 0 dB at
1 kHz, nominal impedance 200 Ω, min. terminating imped-
ance 1 kΩ, max. output voltage 2 V (at 1 kHz), power sup-
ply: phantom powering 12 – 48 V or 1.5 V (AA size) alkaline
battery, supply current 2.2 mA, battery life approx. 150 hrs,
dimensions: Ø 22 x 155 mm, resultant length 94 mm, weight
approx. 45 g.
Technical Data
Frequency response ..................................... 30 – 20,000 Hz - 1 dB
Transmission factor (1 kHz).......................................................0 dB
Nominal impedance ................................................................. 200 Ω
Min. terminating impedance..................................................... 1 kΩ
Max. output voltage................................................... 2 V (at 1 kHz)
Power supply........................................ phantom 12 - 48 V (± 4 V)
or 1.5 V AA size battery
Supply current..........................................................................2.2 mA
Battery life ................................................................ approx. 150 hrs
Dimensions ................................................................155 x Ø 22 mm
Resultant length* .................................................................... 94 mm
Weight .............................................................................approx. 45 g
* Resultant length: this is the figure you need to add to the microphone head
length to give the overall length of the complete microphone.
Cable pictured is an accessory not supplied with the powering module