Instruction Manual - MB 660 series

20 | MB 660
Using the MB 660
Using NoiseGard
You can activate or deactivate NoiseGard if your headset is connected to the
smartphone using Bluetooth, a USB cable, or an audio cable (provided that the
battery is sufficiently charged).
If you are in a noisy environment but would like to have your own quiet space,
you can use the headset itself, without cable and disconnected from any device,
and simply benefit from NoiseGard.
The MB 660 provides excellent attenuation of ambient noise using Sennheiser’s
proprietary NoiseGard technology. The MB 660 also features Adaptive NoiseGard;
when Adaptive NoiseGard is selected, active noise cancellation depends on the
intensity of ambient noise. With Adaptive NoiseGard, active noise cancellation
can be strong if the ambient noise is high, or weak if the ambient noise is low.
Switching NoiseGard to different modes
X Indicates that NoiseGard is switched off.
X Indicates that NoiseGard is switched on.
NoiseGard attenuates the ambient noise to the maximum extent.
X Indicates that NoiseGard is switched to Adaptive mode.
NoiseGard attenuates ambient noise depending on the noise intensity.
If you set NoiseGard to Adaptive mode, you can control the extent of
NoiseGard noise cancellation in CapTune.
Switching TalkThrough on/off
TalkThrough allows you to communicate with other people without having to
remove the headset, even when NoiseGard is switched on.
To switch TalkThrough on and off while playing music:
X Quickly tap the touch pad twice.
TalkThrough is activated.
– If you are playing music using Bluetooth or the USB cable, the music pauses.
– If you are playing music using the audio cable, the music is muted.
2x
hey!
hi!
hello!