Product specification

Cat. No. 003282

ME 64

Microphones | Back-Electret Microphone Head Suitable

for K6 and K6P Powering Modules

General Description

The ME 64 is a cardioid microphone head designed for use with the K6 and

K6P powering modules. It has a very wide range of applications in cluding

reporting, interviews, dubbing, live sound reinforcement and recording

applications. Matt black, anodised, scratch-resistant finish.

Features

Cardioid pick-up pattern

Excellent directivity across whole frequency range

Very good feedback rejection

Effective rejection of incidental rear noise

High speech clarity

High maximum sound pressure level

Wide frequency range

Integrated pop filter

Delivery includes: ME 64

Recommended Accessories

MZW 64 foam windshield Cat. No. 003703

MZW 64 pro foam windshield Cat. No. 003711

Profile

Cardioid microphone head suitable for K6 and K6P powering

modules. Frequency response 40 – 20,000 Hz ± 2.5 dB, sensi-

tivity (free field, no load) 31 mV/Pa ± 2.5 dB at 1 kHz, nomi-

nal impedance 200 Ω (with K6), min. terminating impedance

1 kΩ (with K6), equivalent noise level A-weighted 16 dB,

CCIR-weighted 25 dB, max. SPL 130 dB at 1 kHz (THD = 1 %),

dimensions Ø 22.5 x 106 mm, weight 35 g.

Technical Data

Pick-up pattern ...................................................................... cardioid

Frequency response .................................40 – 20,000 Hz ± 2.5 dB

Sensitivity

(free field, no load) (1 kHz) ............................ 31 mV/Pa ± 2.5 dB

Nominal impedance ...............................................200 Ω (with K6)

Min. terminating impedance...................................1 kΩ (with K6)

Equivalent noise level

A-weighted (DIN IEC 651)........................................................ 16 dB

CCIR-weighted (CCIR 468-3).................................................... 25 dB

Max. SPL (1 kHz)...............................................130 dB (THD = 1 %)

Dimensions .............................................................Ø 22.5 x 106 mm

Weight ............................................................................................35 g

Pictured with K6 powering module and cable (available separately)

PAGE 1
ME 64 Microphones | Back-Electret Microphone Head Suitable for K6 and K6P Powering Modules Cat. No. 003282 General Description The ME 64 is a cardioid microphone head designed for use with the K6 and K6P powering modules. It has a very wide range of applications including reporting, interviews, dubbing, live sound reinforcement and recording applications. Matt black, anodised, scratch-resistant finish. Technical Data Pick-up pattern ......................................................................