Service manual

ManualsBrandsSennheiser ManualsMicrophoneME 80

MICROPHONE ACCESSORIES

ACCESSORIES

670

Shotgun Accessories—Shockmounts

Audio Technica

AT8415: Uiversal shockmount, the AT8415

features a rubber membrane suspension for

isolation from motion and cable noise. Height

and angle adjustment knobs are also provided.

◆ Attenuates noise, shock and vibration

transmitted through mic stands, booms and

mounts.

◆ Lightweight, low-profile design is ideal for

“fishpole” booms and video use

◆ Accepts cylindrical and tapered

microphones

◆ Constant-tension clutch and 360° rotation

◆ Compatible with 3/8”-16 and 5/8”-27

threaded stand

AT8415

(Mfr # AT8415 • B&H# AUAT8415)..............49.95

AT8415D: Same as above, except it adds a pair

of K-Tek’s K-SUS Deluxe 4-Point Polymer

Suspenders. Designed for shockmounts, K-SUS

is a rugged replacement accessory pair of

polymer microphone suspenders, featuring a

4-point design that provides incredible shock

and motion isolation.

(B&H # AUAT8415D)......64.95

AT8410: Attenuates noise, shock and vibration

transmitted through mic stands, booms and

mounts. Spring-clip fits most tapered and

cylindrical mics. Permits easy microphone

insertion and removal without detaching mic

cable. Compatible with 5/8”-27 threaded

stands.

(Mfr # AT8410A • B&H # AUAT8410A)..........49.95

Azden

SMH-1: The SMH-1 is a single piece housing

with flexible bands to hold a shotgun mic

securely and to isolate it from unwanted

vibration and noise.

SMH-1

(Mfr # SMH-1 • B&H # AZSMH1)..................29.95

Beyerdynamic EA86

EA86: A cost effective camera mount, shock

absorbing shotgun mic holder, the EA86

isolates the microphone from moving,

vibration, bumps and motor hum, etc. The

EA-86 consists of a one piece plastic “T” shape

that houses a flexible banded tube mount for

the shotgun, a built-in shoe mount adapter,

and threaded hole underneath that enables

mounting on a fish pole or mic stand.

EA86

(Mfr # 407186 • B&H # BEEA86) .....................34.90

www.bhphotovideo.com

K-Tek

Lightwave

KSM: Ruggedly constructed shockmount with

stretchable polymer formulated suspenders

and vertical angle adjustment to accomodate

mic diameters from 19 to 25mm. Attaches to

any boompole via 3/8” thread. Can be used

with Rycote & Sennheiser zeppelins with

addition K-BWA clamp adapter.

(Mfr # K-SM • B&H # KTKSM)...................................119.95

K-SSM: A short version of the KSM. It is

designed for short shotgun mics like the

Sanken CS-1.

(Mfr # K-SSM • B&H # KTKSSM).....119.95

K-CAM-SM: Same as the KSM, except it

features a camera shoe mount fitting, allowing

placement on video cameras.

(Mfr # K-CAM-SM • B&H # KTKCAMSM) .....................74.95

K-CAM-SSM: Shorter version of above, for

short shotgun mics like the Sanken CS-1.

(Mfr # K-CAM-SSM • B&H # KTKCAMSSM) .................74.95

KSMS: Same as the KSM except with ultra soft,

stretchable polymer-formulated suspenders.

(Mfr # KSMS • B&H # KTKSMS) .................................119.95

K-GPS (General Purpose Suspension):

This versatile high tech 4-point suspension

system features K-Tek’s unique K-SUS polymer

suspenders spaced 3-1/5” apart in a precision -

machined aluminum frame. The result is a

lightweigh shock mount that fits a wide range

of microphones. Swivel mount with 3/8” - 16

thread permits quick mounting to boompoles.

(Mfr # K-GPS • B&H # KTKGPS) .................................154.95

K-GPSS: Short version of the K-GPS otpimized

to fit mics like the Sanken CS-1. It uses K-SUS

polymer suspenders spaced 2” apart in a

precision machined aluminum frame.

(Mfr # K-GPSS • B&H # KTKGPSS)..............................154.95

MM-XL Minimount

A low profile lightweight microphone mount,

the MM-XL isolates the mic from incoming

zoom, gear or motor noise, lens, and mic

boom handling noise. Fitted with a 27mm

diameter camcorder clamp carriage for use

with Canon XL-1, XL-2 and Sony camcorders.

(Mfr # MMXL • B&H # LIMMXL) ...............................125.00

MM-USC Minimount

Mic mount featuring a shoe-mount fitting

which fastens securely to camera accessory

shoe. Features rubber shock mounting to

reduce structure born noise. Accommodates

most shotgun, stereo and other boom-pole

mounted microphones.

(Mfr # MMUSC • B&H # LIMMUSC)...........................165.00

AT8415

Audio-Technica

AT8415D

AT8410A

SMH-1

Azden

Beyerdynamic

EA86

K-SM

K-Tek

K-GPS

K-CAM-SSM

MM-XL

Lightwave Audio

Summary of content (30 pages)

PAGE 1
670 MICROPHONE ACCESSORIES ACCE S S O R I ES Shotgun Accessories—Shockmounts Audio Technica Audio-Technica Azden AT8415: Uiversal shockmount, the AT8415 features a rubber membrane suspension for isolation from motion and cable noise. Height and angle adjustment knobs are also provided. ◆ Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts.
PAGE 2
MICROPHONE ACCESSORIES 671 ACC E S S O R I ES Shotgun Accessories—Shockmounts PSC Rycote Softie Multimount V2 Extremely robust, one-piece rubber shock mounts 58 x 56mm (diameter x length) that supports short to medium length shotgun mics. Mounts to either a camcorder hot-shoe or to a boom pole with a 3/8” Whitworth tip. Available with various hole sizes to accommodates different width mics. Small Hole to fit 19-20mm diameter mics. (Mfr # 037308 • B&H # RYMMV2S) ..........................................
PAGE 3
672 MICROPHONE ACCESSORIES WIN DT E C H Shotgun Accessories—Windscreens Windtech’s SG Series (Shotgun windscreens) prevent unwanted wind, breath and “pop” noises. Made from acoustical hypo-alergenic Sonic Foam, they are washable, long lasting and keep their original shape. More effective than factory models, they also protect from dirt, moisture and impact damage. For high wind applications and extra protection for harsh environments, Windtech offers the Big Gun (BG) Series. Series Number I.D.
PAGE 4
MICROPHONE ACCESSORIES W I N DT E C H / RYCOTE 673 Shotgun Accessories—Wind Protection WindTech Mic-Muff The Mic-Muff has been tested and used in a variety of applications. Typically, it will provide up to 20db of wind noise reduction in a 20 MPH wind with virtually no negative effect on frequency response.
PAGE 5
674 MICROPHONE ACCESSORIES K-TE K / RYCOT E Shotgun Accessories—Wind Protection K-Tek Slip-on Fleecy Windscreen K-Tek’s Slip-on Fleecy Windscreen is a simple and unobtrusive solution for microphone wind protection. The windscreen features an exterior of charcoal grey fleece fitted over a body of open cell foam designed to slip easily and snugly over most popular shotgun microphones. Tiny (3”) for Audio Technica AT-4051A, Sennheiser MKH-50 (Mfr # KFLCYT • B&H # KTKFLCYT) ..................78.
PAGE 6
MICROPHONE ACCESSORIES 675 L I G H T WAVE MINISCREEN High Performance Windscreen The MiniScreen is slip-on windscreen comprising a hollow shell, fabric mesh and and a unique support-disc system to hold the microphone in place. Compatible with microphones with a diameter of 19mm to 27mm, the high performance Miniscreen attenuates wind noise up to 20dB—far superior to the common foam sock—and offers far higher wind protection, along with a sweetened mid-range (to pull in clear dialogue).
PAGE 7
676 MICROPHONE ACCESSORIES RYCOT E Shotgun Accessories–Wind Protection Softie Windshield Rycote Softies provide optimum wind diffusion and noise rejection while remaining cost effective. A robust and practical windshield (70mm in diameter) performing as well as a standard windshield (without Windjammer), the Softie alone provides a fast, flexible and cost effective solution for ENG on-camera microphones.
PAGE 8
MICROPHONE ACCESSORIES 677 K-T E K Shotgun Accessories–Wind Protection Slip-On Fuzzy Windscreen The Slip-On Fuzzy is an excellent wind protection system for exterior recording with shotgun microphones. K-Tek’s unique design combines a traditional faux fur exterior that breaks up the wind with a tightly woven fabric backing – making the Fuzzy the only slip-on windscreen with a layer of extra protection.
PAGE 9
678 MICROPHONE ACCESSORIES RYCOT E Shotgun Accessories–Wind Protection S-Series Suspension & Windshield System The S-Series is a wholly new design - new suspension concept, new materials, new windshield construction - and retains all the renowned Rycote features of flexibility, balance and professional performance. It is lightweight with a minimum of parts, tough enough to withstand the rigours of ENG and simple to use straight out of the box.
PAGE 10
MICROPHONE ACCESSORIES 679 K-T E K / P SC Shotgun Accessories–Wind Protection K-Tek Zeppelin Windscreens Dead air is what K-Tek strives to achieve in windscreen design, and dead air is what you will find in the Zeppelin. The Zeppelin is a practical, user-friendly method for getting maximum shielding from wind exposure during location recording.
PAGE 11
680 MICROPHONE ACCESSORIES RYCOT E / S E N N H E I S E R Shotgun Accessories—Wind Protection Rycote Full Windshield System The full windshield system is made up of the following elements: Modular Suspension (shock mount), Modular Windshield (windscreen, blimp or zeppelin), and Windjammer (furry cover).
PAGE 12
MICROPHONE ACCESSORIES RYCOTE 681 Shotgun Accessories–Microphone Compatibility Manufacturer Microphone AKG C568EB Audio Technica Audio Technica Audio Technica Audio Technica Audio Technica Audio Technica Audio Technica Audio Technica Audio Technica Azden Azden Azden Beyer Beyer Beyer Beyer Beyer DPA Neumann Neumann Neumann Neumann Rode Rode Rode Sanken Sanken Schoeps Schoeps Schoeps Sennheiser Sennheiser Sennheiser Sennheiser Sennheiser Sennheiser Sennheiser Sennheiser Sennheiser Sennheiser Sennheise
PAGE 13
MICROPHONE ACCESSORIES 682 GITZO BOOM POLES Gitzo booms are designed for performance and reliability that meet location sound and broadcast audio professionals’ requirements. Carbon 6x crossed layer tube makes carbon fiber booms lighter, faster and extremely rigid. Anti Leg Rotation system makes boom operation quicker, adjustment easier and more precise. G-Lock system guarantees faster and stronger locking and increases system rigidity by 20%.
PAGE 14
MICROPHONE ACCESSORIES L I G H T WAV E AU D I O 683 G5 • A5 News Boom Poles The G5 (carbon fiber) and A5 (aluminum) News Boom Poles are designed for use in the demanding world of TV news broadcasting. They use some of the most advanced engineering design techniques and robust materials available today. Patented locking system is completely different in design from all other boom poles on the market. To remove weight and ease the cleaning of the pole, they use no metal components.
PAGE 15
684 MICROPHONE ACCESSORIES K-TE K KLASSIC Boom Poles The Professional’s Pole - 5-Section Carbon Fiber Boom Poles Engineered like no other boom pole in the world, the original K-Tek Klassic 5-Section Boom Poles combine thoughtful design, top-of-the-line materials and precision engineering. Available in six convenient sizes, the shortest telescopes from 16” to 59”. The longest extends from only 55” to nearly 21’.
PAGE 16
MICROPHONE ACCESSORIES K-T E K 685 KLASSIC Articulated Boom Poles 6-Section Articulated Boom Poles The introduction of the K-Tek Klassic revolutionized the way that boom poles were made. The Articulated Poles are revolutionizing the way that Boom Poles are used! Expansive Reach The KA–113 has four telescoping sections before the joint and two more after, providing a reach of nearly 9.5’. Five positive locking positions provide articulation at 90, 112.5, 135, 157.5 or 180°.
PAGE 17
686 MICROPHONE ACCESSORIES K-TE K AVALON Boom Poles Crafted of the same high density graphite fiber used in the K-Tek Klassic line or in cost-effective aluminum tubing, Avalon boom poles are designed to meet the needs of ENG and DV Camera crews. The series offers many of the same benefits of the original Klassic boom poles in an affordable package — eliminating some deluxe features but without sacrificing any of the K-Tek quality.
PAGE 18
MICROPHONE ACCESSORIES PSC 687 ELITE SERIES Carbon Fiber Boom Poles PSC’s Elite series of boom poles represent a no compromise design. Each pole is hand crafted in the USA from the finest materials available. The Elite series utilize a blend of super high modulus carbon fibers that are precision wound by top carbon fiber specialists. These high tech tubes provide a delicate balance of strength, stiffness, torsion rigidity and low handling noise.
PAGE 19
688 MICROPHONE ACCESSORIES C ASE S Boom Pole Accessories Impact Neoprene Boompole Bag Made of neoprene for maximum protection, the boompole bag features an adjustable shoulder strap. This bag will accommodate a boompole and complete ENG kits with a shotgun mics, softie, and boompole cable attachments. (IMBPB10) .......................................39.95 Universal Pistol Grip ◆ Universal hand grip adapts to any standard microphone suspension.
PAGE 20
MICROPHONE ACCESSORIES ACC E S S O R I ES 689 Boom Pole Accessories Boom-Audio Kit Cool ATS-RAM Boompole Cradle Boom Support System The KIT COOL is a device that allows a fishpole to be supported by one hand in virtually any position, reducing arm strain and fatigue, and leaving the other hand free to operate the controls of a mixer, recorder, and other field audio devices. A three-section telescopic support pole, weighing less than 16 oz., extends from 21.65” to 43”.
PAGE 21
690 MICROPHONE ACCESSORIES C A B L E T E C H N IQUES/REMOTE AUDIO MICROPHONE ACCESSORIES Cable Techniques Remote Audio BDS v2 Battery Bud Battery Distribution Box Battery Distribution System Battery Bud is a tiny, lightweight DC distribution box that routes power to as many as five pieces of equipment from three Hirose 4-pin outputs, receiving 12-18v DC input from common rechargeable batteries such as an NP-1.
PAGE 22
MICROPHONE ACCESSORIES ACC E S S O R I ES 691 MICROPHONE ACCESSORIES BEACHTEK ROLLS CT-1 Cable Tester Any sound person knows how difficult it is to maintain cables. The CT-1 provides an efficient way to detect shorted or open cables. The unit tests 1/4” TS, 1/4” TRS, RCA, XLR and MIDI cables. Plus - it will test combinations of the above. An easy-to-read LED indicates the status of the cable. (Mfr # CT1 • B&H # ROCT1) .........................................53.
PAGE 23
692 HEADPHONES SONY HEADPHONES Sony’s range of professional headphones are engineered for a combination of strength, comfort and practicality and are used daily in broadcast and recording studios worldwide. Designed to accurately monitor the wide dynamic range and extended frequencies delivered by modern digital audio equipment, the MDR-7500 series is precision manufactured using the highest grade materials.
PAGE 24
HEADPHONES OTTO ENGINEERING The V1-10437 from Otto Engineering is an IFB and personal monitoring earphone that features a 48” straight cable and an 1/8” Mono miniplug connector. An attached clip secures the base to a shirt or jacket. (Mfr # V110437 • B&H # OTV110437) ...........................44.
PAGE 25
694 AUDIO FOR VIDEO AMBI E NT TIMECODE Lockit Box Timecode / Trilevel Sync Generator (Mfr # ACL202CT • B&H # AMACL202CT) Lockit Box is a small, highly accurate, portable timecode and color videosync and wordclock generator. Pro audio and video machines can be genlocked to the Lockit box, thus giving a very low drift between equipment working together. Typically, the drift will be less than 1 frame per day, without connecting cables or radio links.
PAGE 26
AUDIO FOR VIDEO D EN E C KE 695 TIME CODE SLATES TS-C Time Code Slate A compact and lightweight full featured smart slate, the TS-C reads, generates and displays SMPTE/EBU time code. Ideal for documentary work, insert shots or anywhere a big slate is too cumbersome, the TS-C jams to all standard frame rates, including 23.976 for HD. It reads and displays off speed time code used in special situations such as music video playback. The TS-C also supports Aaton serial communication.
PAGE 27
696 AUDIO FOR VIDEO D ENE C K E TIMECODE GENERATORS GR-1 Master Clock Generator The GR-1 is a precision time code generator/reader designed for production sound recording. It can be used as a stand-alone master time code source in most recording environments. Low power consumption with back lighting assures users of long battery life in a small reliable package. ◆ Reads SMPTE/EBU time code at normal ◆ operating speeds. ◆ Displays time code/user bits and mode on a low power LCD backlit display.
PAGE 28
AUDIO FOR VIDEO D EN E C KE 697 TIMECODE READERS TC-1 Time Code Reader The TC-1 opens the world of time code to film editing at a fraction of the cost of other systems. Using time coded film dailies, editors working directly with film can use the TC-1 to assist them in syncing, making high speed searches, logging, and keeping accurate time-date records of the actual production.
PAGE 29
698 AUDIO FOR VIDEO HOR I TA MINIATURE PORTABLE TIME CODE EQUIPMENT PTG Mini Portable Time Code Generator with LCD PTR Mini Portable Time Code Reader with LCD Designed for use in the field (runs 24 hours on a single 9V battery), the palm-sized PTG features a large 2-line LCD readout for time code, user bits, and setup information. Easy to setup, it is ideal for use in multicamera shoots for games, concerts, weddings, etc.
PAGE 30
AUDIO FOR VIDEO H O R I TA 699 TIME CODE & TAPE/FIELD LOGGING Script Kit PA Logging Clipboard with Software The “Script Kit” combines the PTR portable LCD time code reader and a WTS100M wireless time code system into a powerful, easy to use field logging system. The units are enclosed in a sturdy anodized aluminum case mounted on a clipboard that holds pre- printed Script Kit Log sheets plus your script and other documents inside.