System instruction manual TeamConnect

TeamConnect | 55
The Configuration Manager software
Configuring communication settings
The settings of the network and serial connections of the SL TeamConnect CU1
are configured in the Communications area of the configuration screen.
To configure the communication settings:
X Click on the Communications icon in the configuration screen.
The Communication Settings configuration window opens.
The Communication Settings configuration window has two tabs where you
can adjust the following settings:
Tab Option Settings
Networking MAC address Indicates the MAC address of the
SL TeamConnect CU1.
Device Name Defines the name of the
SL TeamConnect CU1 device in
the network. The device name is
required for the address of the
browser-based dialer. The address is
http://DeviceName.
Example:
• Device name: TeamConnect-123
• Address of browser-based dialer:
http://TeamConnect-123
Room Name Defines the room name required to
access the SL TeamConnect CU1 in the
mobile dialer iOS App.
Use DHCP Defines if the IP address is obtained
automatically (DHCP is activated)
or if the IP address is static (DHCP is
deactivated).
Use DNS Defines if a domain name system is
used for static IP addresses.
IP Filters Defines up to 4 IP filters. If an IP
filter is defined, only the devices
with the IP addresses entered in the
IP Filters area can connect to the
SL TeamConnect CU1 via an Ethernet
connection.
Change Admin
Login
Defines the username and
password required to access the
SL TeamConnect CU1 via an Ethernet
connection in the Configuration
Manager software.
Change Room
Password
Defines the room password required to
access the meeting room in the mobile
dialer iOS App and the browser-based
dialer.
Serial Baud Rate Adjusts the data rate of the RS-232
control port.
Flow Control Manages the data rate between two
data nodes, preventing a fast sender
from outrunning a slow receiver.
X Open the respective tab to adjust the desired settings.