Product specification MEB 102-L TC

PRODUCT SPECIFICATION
TeamConnect
MEB 102-L TC, MEB 104-L TC
1/4
FEATURES
• Unobtrusive, timeless design
• Optimized for speech
• Connection cable included
• Bi-color status indication
• Made in Germany
Compact and unobtrusively designed, the boundary layer
microphones MEB 102-L TC (omnidirectional) and MEB
104-L TC (cardioid) are the perfect in-table microphone
solution for the TeamConnect Audio Conferencing System.
Each of them features a proven Sennheiser microphone
capsule for the best speech intelligibility, and is protected
by a rugged housing. With a bi-color LED ring for status
indication.
DELIVERY INCLUDES
• Boundary layer microphone
• Connection cable
• Quick Guide
• Safety Guide
• Mounting material
MEB 102-L TC MEB 102-L TC
ARCHITECT‘S SPECIFICATION
The microphone shall be a pre-polarized condenser boundary layer microphone designed for use with the SL MIC HUB 1
in TeamConnect conferencing applications. The omni-directional microphone capsule shall be optimized for speech intel-
ligibility. The microphone capsule shall be protected by a rugged sound inlet basket.
The frequency response shall be 40 Hz–20,000 Hz and sensitivity shall be 16 mV/Pa. Nominal impedance at 1 kHz shall
be 200 O. Equivalent noise level shall be 21 dB(A) or 31 dB weighted as per CCIR 468-3. Dynamic range shall be 104 dB
(A). Maximum SPL shall be 125 dB. The microphone shall provide a 5-pin XLR cable of approx. 3 m length, terminating in a
5-pin terminal connector and shall have an M20 thread.
The microphone shall operate on 24–48 V phantom power. Dimensions shall be 28.5 mm (1.12“) in diameter and 83 mm
(3.27“) in total height. The installation height shall be 12 mm (0.57“). Weight shall be 58 grams (2.05 oz). Operating tem-
perature shall range from 0 °C to +40 °C (+32 °F to +104 °F). The current consumption of the bi-color LED ring for status
indication shall be 6 mA.
The TLL voltage for LED activation shall be high level > 2.4 and low level < 0.4 V. The microphone shall be the Sennheiser
MEB 102-L TC. The microphone shall be a pre-polarized condenser boundary layer microphone designed for use with the
SL MIC HUB 1 in TeamConnect conferencing applications.The cardioid microphone capsule shall be optimized for speech
intelligibility. The microphone capsule shall be protected by a rugged sound inlet basket.
The frequency response shall be 40 Hz–20,000 Hz and sensitivity shall be 14 mV/Pa. Nominal impedance at 1 kHz shall
be 200 O. Equivalent noise level shall be 28 dB(A) or 38 dB weighted as per CCIR 468-3. Dynamic range shall be 97 dB
(A). Maximum SPL shall be 125 dB. The microphone shall provide a 5-pin XLR cable of approx. 3 m length, terminating in a
5-pin terminal connector and shall have an M20 thread.
The microphone shall operate on 24-48 V phantom power. Dimensions shall be 28.5 mm (1.12“) in diameter and 90 mm
(3.54“) in total height. The installation height shall be 19 mm (0.75“). Weight shall be 60 grams (2.15 oz). Operating tem-
perature shall range from 0 °C to +40 °C (+32 °F to +104 °F). The current consumption of the bi-color LED ring for status
indication shall be 6 mA. The TLL voltage for LED activation shall be high level > 2.4 and low level < 0.4 V.
The microphone shall be the Sennheiser MEB 104-L TC.