MKE 2 GOLD Instructions for use MKE 2 Gold.pmd 1 07.02.
MKE 2 GOLD Condensor clip-on microphone with omnidirectional characteristic for top soundquality and robustness requirements. Suitable for vocal transmission, close-up miking, and miking of instruments in all fields of live sound transmission. Characteristics 씰 Extremely small size, i.e. unobtrusive attachment to articles of clothing or the body. 씰 Insensitive to structure-borne noise. 씰 Linear frequency response. 씰 Largely insensitive to penetration of sweat due to the patented tandem diaphragm.
High note emphasis Your microphone is delivered with two slip-on caps of different lengths. You may use these caps for high-note emphasis. Slip the cap on the head of the microphone until it locks into place. Please refer to the frequency diagrams on page 51. 씰 Short slip-on cap: MZC2-1 Cat. no. 076612 씰 Long slip-on cap: MZC2-2 Cat. no. 076645 Makeup protection Please protect your MKE 2 GOLD by means of the makeup protection, if you attach your MKE 2 GOLD to your body and want to put on makeup.
Attachment of the microfone Depending on the field of application, you may attach the MKE 2 GOLD in different ways to either articles of clothing or your body. Attachment to articles of clothing You may use the MZQ 2 GOLD clip to attach the microphone to your lapel, tie, collar, a button hole, etc. You may rotate the microphone holder in the clip in steps of 90°. For thin clothes (e.g. silk), please use the outer hole where the clip’s contact pressure is the highest. 14 MKE 2 Gold.pmd 14 07.02.
You may also use the MZS 2 pin to attach the microphone to articles of clothing made of fabric that will not be damaged by the pin. The pin attachment withstands high mechanical loads and is also a very convenient solution, if the articles of clothing do not have collars or edges to which the MZQ 2 clip can be attached. The MZM 10 and MZM 2 magnetic clips can be used for unobtrusive attachment of the microphone to articles of clothing.
Wind-shields Wind noise impairs the quality of outdoor recording and close-up miking. The MZW 2 and MZW 02 wind-shields considerably reduce the wind noise. Please install the MZW 2 wind-shield, first. This wind-shield reduces the wind noise by a maximum of 20 dB. You may further reduce the wind noise by 10 dB by means of the additional MZW 02 foam-net wind-shield. MZW 2 and MZW 02 are available as accessories. Freefield frequency response 16 MKE 2 Gold.pmd 16 07.02.
17 MKE 2 Gold.pmd 17 07.02.2007, 13:53 via SK 2012 transmitter Microdot anthracite 1.6 m 4.8 mm 1g Plug Colour Cable length Diameter of the microphone Weight (without plug+cable) MZC 2-1 slip-on cap MZC 2-2 slip-on cap Operating instructions 1 1 1 142 dB Sound pressure level limit Feed Delivery includes: 26 dB 39 dB Equivalent noise level A-weighted (DIN IEC 651) CCIR-weighted (CCIR 468-1) 1 1 1 1g 4.8 mm 1.6 m beige Microdot via SK 2012 transmitter 142 dB 26 dB 39 dB 4.
Manufacturer declarations Warranty 2 years Approval Sennheiser electronic GmbH & Co. KG declare that this device is in compliance with the applicable CE standards and regulations. WEEE Declaration Please dispose of this product at the end of its operational lifetime by bringing it to your local collection point or recycling centre for such equipment. 18 MKE 2 Gold.pmd 18 07.02.
Sennheiser electronic GmbH & Co. KG 30900 Wedemark, Germany Phone +49 (05130) 600 0 Fax +49 (05130) 600 300 www.sennheiser.com Printed in Germany MKE 2 Gold.pmd Publ. 02/07 52 077490/ A04 07.02.