Instruction manual
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the earphones
- Information on the rechargeable battery, the charging process and the first use
- Charging the rechargeable battery of the earbuds and the charging case
- Connecting the earphones to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the earphones with a Bluetooth device
- Disconnecting the earphones from a Bluetooth device
- Installing the Smart Control app
- Selecting suitable ear adapters for optimum fit of the earbuds
- Inserting the earbuds into the ears
- Switching the earbuds on
- Switching the earbuds off
- Adjusting the volume
- Listening of ambient noise or conversations - activating/deactivating the Transparent Hearing function
- Adjusting the Transparent Hearing function
- Using the voice assistant/voice dialing
- Using the Smart Pause function
- Controlling the music playback
- Making calls using the earphones
- Displaying the battery charge status
- Adjusting sound effects/the equalizer
- Setting the voice prompts/beep sounds
- Storing or transporting the earphones in the charging case
- Care and maintenance
- FAQ/If a problem occurs ...
- Specifications
- Manufacturer Declarations
Using the earphones
MOMENTUM True Wireless | 15
2. Simultaneously touch and hold the right and the left touch control
panel for 5 seconds until you hear the voice prompt “Pairing” and
a beep.
The LEDs of the earbuds flash blue and red. The earbuds are in
pairing mode.
3. Activate Bluetooth on your Bluetooth device.
4. Via the menu of your Bluetooth device, start the search for new
Bluetooth devices.
All active Bluetooth devices in the proximity of your smartphone
are displayed.
From the list of found Bluetooth devices, select “MOMENTUM
TW”. If necessary, enter the default pin code “0000”.
If pairing was successful, you hear the voice prompt “Pairing suc-
cessful” and the LEDs of the earbuds flash blue 3 times.
Disconnecting the earphones from a
Bluetooth device
▷ Via the menu of your Bluetooth device, disconnect the connection
to the earphones.
The earphones are disconnected from the Bluetooth device. The
earphones then search for other paired devices. If no device is
found, you hear the voice prompt “No connection”. The earphones
switch to idle mode.
Installing the Smart Control app
To make full use of all the settings and functions of the headphones,
you need to have the free Sennheiser Smart Control app installed on
your smartphone.
Download the app from the App Store or Google Play and install it on
your smartphone. Alternatively, you can use your smartphone to
scan the following QR code or to call up the following Internet site:
(www.sennheiser.com/smartcontrol)
If no connection is established within 1 minute, pairing mode is
terminated and the earbuds switch to idle mode. If necessary,
repeat the steps described above.
If you want to clear the Bluetooth pairing list of the earphones,
reset the earphones to the factory default settings (>
29).
“Sennheiser Smart Control”