Specs



Switchable roll-off ﬁ lter (–3 dB at 160 Hz)



Fixed low-cut ﬁ lter (–3 dB at 16 Hz)

 Excellent suppression of handling noise

 Extremely low inherent self-noise –

complex acoustic details are

reproduced exactly

 High-quality –10 dB pad protects

against overmodulation

 Active filter with fully floating, balanced,

low-impedance output

 Allows for easy connection to subsequent

recording equipment and highly precise,

natural sound reproduction

 Extremely compact design



Module can be used with remote accessories

the new ﬁ lter module MZF 8000

Developed for the broadcast and ﬁ lm industries, the MZF 8000 ﬁ lter module

effectively blocks interference caused by infrasound – such as low-frequency

wind and handling noise – thus ensuring top-quality audio recordings with

the MKH 8020 (omni-directional), MKH 8040 (cardioid) and MKH 8050

(super-cardioid) RF condenser microphones.

The high degree of ﬂ exibility provided by their modular design, the

weather-proof microphone principle and the natural, warm sound of the

microphone heads make the 8000 series unique – and the perfect choice

for use in studios, for concerts, broadcasts and in the ﬁ lm industry.

Sound

The Soul of

Possible Combinations

MKH 8020, RF condenser microphone, omni-directional

MKH 8040, RF condenser microphone, cardioid

MKH 8050, RF condenser microphone, super-cardioid

PAGE 1
The Soul of Sound the new ﬁlter module MZF 8000 Developed for the broadcast and ﬁlm industries, the MZF 8000 ﬁlter module effectively blocks interference caused by infrasound – such as low-frequency wind and handling noise – thus ensuring top-quality audio recordings with the MKH 8020 (omni-directional), MKH 8040 (cardioid) and MKH 8050 (super-cardioid) RF condenser microphones.
PAGE 2
Technical Data Technical Data Low-cut ﬁlter (ﬁxed) . . . . . . . . . . . . . . . . . . . . . . . . . . . .–3 dB at 16 Hz Switchable roll-off ﬁlter . . . . . . . . . . . . . . . . . . . . . . . . .–3 dB at 160 Hz Attenuation (switchable pad) . . . . . . . . . . . . . . . . . . . .–10 dB Increase to the equivalent noise level according to DIN IEC 651 . . . . . . . . . . . . . . . . . . . . . . . .At 0 dB: 1 dB (A). . . . . . .At –10 dB: 4 dB (A) Max. input voltage . . . . . . . . . . . . . . . . . . . . . .