User Manual

Presence Grey Bluetooth headset
PUTTING THE HEADSET INTO OPERATION 7
Pairing the headset with a Bluetooth device
By way of example of a mobile phone, the following chapter describes how to pair the headset with a Bluetooth device.
In case of deviation, proceed as described in the instruction manual of your mobile phone.
1
OFF
press & hold...
2
ON
”Pairing“
Gently push the on/off power slide towards the
headset.
The voice prompt “power off” is announced in the
headset and the LED flashes red 3 times.
Keep the multi-function button pressed and gently pull
the on/off power slide away from the headset.
The LED alternately flashes blue and red. The headset
is in pairing mode.
3
Bluetooth
4
Search devices...
Enable the Bluetooth visibility on your mobile phone. Start a search for Bluetooth devices.
All available devices in the proximity of the mobile
phone are displayed.
5
Sennheiser Presence
Laptop Nick
keyword: 0000
< 20 cm
6
”Pairing successful”
3x
Select “Presence” to establish a Bluetooth connection
to the headset. If necessary, enter the default PIN code
“0000”.
Once the headset is paired with the mobile phone, the
LED goes off.