User Manual

Presence Grey Bluetooth headset
PUTTING THE HEADSET INTO OPERATION 8
Using the headset with a computer and a Bluetooth USB dongle
1
OFF
press & hold...
2
ON
”Pairing“
Gently push the on/off power slide towards the
headset.
The voice prompt “power off” is announced in the
headset and the LED flashes red 3 times.
Keep the multi-function button pressed and gently pull
the on/off power slide away from the headset.
The LED alternately flashes blue and red. The headset
is in pairing mode.
3
Press & hold
3s
4
< 20 cm
Plug the Bluetooth USB dongle into the USB port of
your computer.
Press and hold the dongle’s button for 3 seconds to
enter pairing mode.
The LED alternately flashes blue and red.
5
3x
”Pairing successful”
3x
Once the Bluetooth devices are paired, the LED flashes
3 times blue and then lights up in a constant dim blue.