User Manual

Putting the headset into operation
Presence | 13
Pairing the headset with a Bluetooth device
By way of example of a mobile phone, the following chapter describes how
t
o pair the headset with a Bluetooth device. In case of deviation, proceed
as described in the instruction manual of your mobile phone.
1 Switch the headset off (see page 17).
2 Keep the multi-function button pressed
and gently pull the on/off
power slide away from the headset. The LED alternately flashes blue
and red. The headset is in pairing mode.
3 Enable the Bluetooth
visibility on your mobile phone.
4 On the mobile phone, start a search for Bl
uetooth devices. All available
devices in the proximity of the mobile phone are displayed.
5 From the found Bluetooth devices, se
lect “Presence” to establish a
Bluetooth connection to the headset. If necessary, enter the default PIN
code “0000”.
6 Once the headset is paired with the mobile phone, the LED goes off.
If p
airing is not successful within 5 minutes, the headset automatically
returns to connectable mode. Repeat the pairing procedure.
1
3
6
4
20 cm
Menu
Bluetooth on
Bluetooth off
”Pairing successful”
2
”Pairing“
5
Presence
Sennheiser VMX 200
Presence
Keyword:
0000
Menu
Add device
off
3x
on
press and hold while powering on