Bluetooth headset for phone calls Presence Instruction manual
Contents Contents Important safety information ...................................................................... 2 The Presence Bluetooth headset ................................................................. 4 Package contents ........................................................................................... 5 Product overview ........................................................................................... Presence headset .......................................................
Important safety information Important safety information 왘 Read this instruction manual carefully and completely before using the product. 왘 Always include this instruction manual when passing the product on to third parties. 왘 Do not use an obviously defective product. Preventing damage to health and accidents 왘 Do not listen at high volume levels for long periods of time to prevent hearing damage. 왘 Always maintain a distance of at least 3.
Important safety information Safety instructions for rechargeable batteries In extreme cases, abuse or misuse of rechargeable batteries can lead to: WARNING • • • • explosion, fire development, heat generation or smoke or gas development. Dispose of products with built-in rechargeable batteries at special collection points or return them to your specialist dealer. Switch rechargeable battery-powered products off after use.
The Presence Bluetooth headset The Presence Bluetooth headset The stylish new Presence Bluetooth headset is the wireless solution for phone calls with mobile phones and softphones with superb sound quality in all environments. It features WindSafe and SpeakFocus technology to filter away background noise and enhance voice quality, thus providing ultimate speech intelligibility. Bluetooth The headset complies with the Bluetooth 4.0 standard and is compatible with all Bluetooth 1.1, 1.2, 2.0, 2.1, 3.0 and 4.
Package contents Package contents Presence mono Bluetooth headset with built-in rechargeable Lithium-Polymer battery Adjustable ear hook Ear adapters with loop (S, M, L) Car charger Charging cable BTD 800 USB dongle – for Presence UC variants only Carrying case for headset and accessories – for Presence UC variants only Quick Guide Safety Guide Quick Guide Safety Guide A list of accessories can be found on the Presence product page at www.sennheiser.com/cco.
Product overview Product overview Presence headset 4 2 1 5 3 9 6 8 7 1 Volume + button* 6 Speaker 2 Volume – button* 7 Ear hook 3 Multi-function button 8 USB socket 4 Microphones 9 LED 5 On/Off power slide * You can swap the +/– assignment of the Volume buttons (see page 18) If, for example, you want to wear the headset on the left ear instead of the right (see page 14).
Product overview Overview of pictograms Meaning of the pictograms for pressing a button Pictogram Meaning Briefly press this button. 2x Double-press this button. 5s Keep this button pressed for 5 seconds. Meaning of the pictograms for the flashing of the LED Pictogram Meaning This pictogram symbolizes a flashing. 1s This pictogram symbolizes a time interval. Examples of some of the pictograms that are used throughout this instruction manual: Pictogram Meaning The LED flashes.
Product overview Overview of the LED indications Meaning during operation LED Meaning Headset switches on Headset switches off Headset is in pairing mode Pairing was successful Pairing has failed or has been cancelled 2s 2s Connectable state, not connected Once the headset is successfully connected, the LED goes off. Meaning during calls LED Meaning Incoming call Incoming call + rechargeable battery is weak Meaning during charging LED corresponds to a talk time of ...
Product overview Overview of buttons Multi-function button Press the button 1s 2x Function Page Accepts a call 19 Ends a call 19 Transfers a call from the mobile phone to the 19 headset 21 Accepts an incoming call and ends the active call (managing two calls) 21 Ends the active call and makes the call on hold active (managing two calls) 20 Cancels redialing 20 Cancels voice dialing 17 Retrieves information on the remaining talk time Rejects a call 19 Rejects the incoming call and continues the active 21
Product overview Volume buttons Button Press one of the volume buttons + Press both volume buttons Press and hold both volume buttons Press and hold both volume buttons Press and hold both volume buttons 10 | Presence Duration Function Page Beep(s) During an active call: 18 – Increases/reduces the speaker volume During music reproduction: Increases/reduces the audio volume In idle mode (no active call or music reproduction): Increases/reduces the volume for the ring tone, the beeps and the voice promp
Putting the headset into operation Putting the headset into operation Charging the headset battery WARNING Danger of injury! Wearing the headset when charging can cause burns and injuries. 왘 Do not wear the headset when charging. 1:20 h A complete charging cycle takes about 1 hour and 20 minutes. Before using the headset for the first time, charge the rechargeable battery for a complete charging cycle without interruption. A charging time of ... corresponds to a talk time of ... LED flashes approx.
Putting the headset into operation Battery level indicator displayed on Apple iPhone When the headset is paired with an iPhone, the iPhone screen shows an additional battery level indicator for the headset. Pairing the headset with Bluetooth devices CAUTION Danger of malfunction! The transmitted radio waves of mobile phones can impair the operation of sensitive and unprotected devices. 왘 Only make calls with the headset in locations where wireless Bluetooth transmission is permitted.
Putting the headset into operation Pairing the headset with a Bluetooth device By way of example of a mobile phone, the following chapter describes how to pair the headset with a Bluetooth device. In case of deviation, proceed as described in the instruction manual of your mobile phone. 1 Switch the headset off (see page 17). 2 Keep the multi-function button pressed and gently pull the on/off power slide away from the headset. The LED alternately flashes blue and red. The headset is in pairing mode.
Using the headset Using the headset Individually adjusting the headset and wearing it For an optimized and individual wearing comfort, the headset can be worn on your left or right ear in three different ways: with the ear hook or the ear adapter or a combination of both. Wearing the headset with ear adapter The ear adapter with loop is supplied in 3 different sizes: S, M, L. Select the size that fits your ear.
Using the headset Wearing the headset using the ear hook You can combine the ear hook with the ear adapter without loop. If then the headset does not fit properly, use one of the ear adapters with loop. 1 Remove the ear adapter with loop. 2 Attach the ear adapter without loop to the headset. 3 Attach the ear hook to the headset. If you want to change the wearing ear of the headset, attach the ear hook the other way round. 4 Move the headset to your ear and guide the ear hook behind your ear.
Using the headset Switching the headset on and connecting it 왘 Gently pull the on/off power slide away from the headset. The LED flashes blue 3 times. The voice prompt “power on” is announced in the headset. The LED flashes 3 times blue every 2 seconds until the headset finds a paired Bluetooth device to connect to.
Using the headset Switching the headset off 왘 Gently push the on/off power slide towards the headset. The voice prompt “power off” is announced in the headset and the LED flashes red 3 times. The headset ends the call and switches off. ”power off“ 3x All volume settings are saved automatically when the headset is switched off.
Using the headset Changing the volume WARNING Vol + Hearing damage due to high volumes! Listening at high volume levels for long periods can lead to permanent hearing defects. 왘 Set the volume to a low level before putting on the headset. 왘 Do not continuously expose yourself to high volumes.
Using the headset Making calls using the headset Making a call 왘 Dial the desired number on your mobile phone. You hear a beep in the headset. If your mobile phone does not automatically transfer the call to the headset: 왘 Press the multi-function button once to transfer the call from the mobile phone to the headset. Alternatively, press a button on your mobile phone (see the instruction manual of your mobile phone).
Using the headset Transfering the call to/from the headset Once a connection is established, you can transfer the call to/from the headset. 왘 Press the multi-function button: Duration Function Beep(s) Transfers a call from the headset to the mobile phone 1s Transfers a call from the mobile phone to the headset Redialing The redialing function is only supported by Bluetooth devices with a “hands free profile” (HFP).
Using the headset Muting the headset’s microphone 왘 Press the Volume + and – button: Duration Function Voice prompt Mutes the headset’s microphone ”Mute on“ Unmutes the headset’s microphone ”Mute off“ Managing multiple calls You can use the headset simultaneously with two connected Bluetooth devices (see page 16). 왘 Switch the headset on. The headset automatically tries to establish a connection to the two last connected Bluetooth devices.
Cleaning and maintaining the headset Cleaning and maintaining the headset CAUTION Liquids can damage the electronics of the product! Liquids entering the housing of the device can cause a short circuit and damage the electronics. 왘 Keep all liquids far away from the product. 왘 Do not use any cleansing agents or solvents. Cleaning the headset 왘 Only use a dry cloth to clean the product.
If a problem occurs ... If a problem occurs ... Problem Possible cause Possible solution Headset cannot be switched on The rechargeable battery is flat. Recharge the rechargeable battery. 11 No audio signal The headset is not paired with the mobile phone. Check if the headset is paired. If necessary, pair the headset again. 13 The volume is adjusted too low. Increase the volume. 18 The headset is switched off. Switch the headset on. 16 The pairing does not work.
If a problem occurs ... If you are out of the Bluetooth transmission range Calling is only possible in the Bluetooth transmission range of the mobile phone/Bluetooth device. The transmission range largely depends on environmental conditions such as wall thickness, wall composition etc. With a free line of sight, the transmission range of most mobile phones and Bluetooth devices is up to 10 meters.
Specifications Specifications Presence headset Dimensions (W x H x D) approx. 51 x 19 x 23 mm Weight without ear hook approx. 13 g Standby time up to 14 days Talk time up to 10 hours Charging time 1 h 20 min Rechargeable battery (built-in) Lithium Polymer; 5 V; 150 mA Speaker type dynamic, neodymium magnet Speaker frequency response 150 – 6,800 Hz (wide band) 300 – 3,400 Hz (narrowband) 100 – 15,000 Hz (A2DP/Music) Sound pressure max.
Manufacturer Declarations Manufacturer Declarations Warranty Sennheiser Communications A/S gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner. In compliance with the following requirements • WEEE Directive (2002/96/EC) Please dispose of this product by taking it to your local collection point or recycling center for such equipment.
Sennheiser Communications A/S Industriparken 27, 2750 Ballerup, Denmark www.sennheiser.com Publ.
