Precision Absolute Sonic Perfection PX 210 BT Instruction manual
Contents Contents Important safety instructions .......................................................... 2 PX 210 BT ............................................................................................. 4 Delivery includes ................................................................................. 5 Product overview ................................................................................ 7 Putting the PX 210 BT into operation .............................................
Important safety instructions Important safety instructions • • • • • Please read these instructions carefully and completely before using the headphones. Make these instructions easily accessible to all users at all times. Always include these instructions when passing the headphones on to third parties. Only use the headphones in aircraft where wireless Bluetooth® transmission is permitted. Do not use the headphones in situations which require special attention (e.g.
Important safety instructions Intended use Intended use of the headphones includes • • having read this instruction manual, especially the chapter “Important safety instructions” on page 2, using the headphones within the operating conditions and limitations described in this instruction manual. “Improper use” means using the headphones other than as described in this instruction manual, or under operating conditions which differ from those described herein.
PX 210 BT PX 210 BT The PX 210 BT headphones provide undisturbed music enjoyment in noisy environments – even without the constrictions of cables. Their supraaural, closed design make the PX 210 BT especially suitable for use with in-flight entertainment systems. Bluetooth The PX 210 BT comply with the new Bluetooth 2.1 standard. Via their Bluetooth interface, they can be connected to a wide variety of Bluetooth enabled devices.
Delivery includes Delivery includes 1 PX 210 BT headphones 1 BA 370 PX battery pack 1 USB charging cable DE 1 PSC 03R-050 mains unit with country adapters 1 audio cable (2.5 mm to 3.
Delivery includes Overview of the pictograms Meaning of the pictograms for pressing a button Pictogram Meaning Briefly press this button. Keep this button pressed for 4 seconds. 4s Keep this button pressed until the desired setting is made or the desired action is completed. Meaning of the pictograms for the flashing of the LED Pictogram Meaning This pictogram symbolizes a flashing. This pictogram symbolizes an interruption. This pictogram symbolizes an interval.
Product overview Product overview 쐃 A DE EN FR IT ES NL 쐃 Headband 쐏 Ear pad 쐇 Socket for audio cable 쐄 Socket for charging cable 쐋 Bluetooth button 쐂 Battery pack compartment A Operating panel 5 6 1 4 2 3 햲 LED 햵 Rewind button 햳 Fast-forward button 햶 Master button 햴 Volume button 햷 Volume button 7
Putting the PX 210 BT into operation Putting the PX 210 BT into operation Before using the PX 210 BT for the first time, remove the protection strip from the battery pack. Charging the battery pack 왘 Before using the battery pack for the first time, charge it for at least 3 hours. 3h When charging the battery pack, the LED 쐆 on the battery pack lights up red. When the battery pack is fully charged, the LED 쐆 on the battery pack lights up green.
Putting the PX 210 BT into operation Possibilities of charging the battery pack First, connect the charging cable 쐊 to the battery pack as described in section a and then connect the charging cable 쐊 to a power source as described in section b. 쐊 a DE b EN US FR EU AU UK IT ES a Connecting the charging cable to the battery pack You can charge the battery pack either inside or outside the headphones. This is helpful if you are using a spare battery pack (to be ordered separately).
Putting the PX 210 BT into operation b Connecting the charging cable to the mains unit, to a PC or to other USB devices In order to charge the battery pack, you can connect the charging cable to either the USB socket of your PC or the supplied mains unit or to other USB devices. To connect the charging cable to a PC: 쐆 왘 Connect the USB plug of the charging cable 쐊 to the USB socket of your PC. The battery pack is being charged. The LED 쐆 on the battery pack lights up red.
Putting the PX 210 BT into operation Switching the PX 210 BT on/off CAUTION! Hearing damage due to high volumes! Listening at high volume levels for long periods can lead to permanent hearing defects. Please protect your hearing. Sennheiser headphones also sound exceptionally good at low volumes. DE 왘 Set the volume to a comfortable level. EN Switching the PX 210 BT on 1 5 왘 Press the Master button 햶 and keep it pressed until the flashes blue. You hear an ascending beep.
Putting the PX 210 BT into operation Connecting the PX 210 BT to the audio source CAUTION! Danger of malfunction! The transmitted radio waves can impair the operation of sensitive and unprotected devices. 왘 Only use the headphones in aircraft where wireless Bluetooth transmission is permitted or use the audio cable instead (see “Connecting the PX 210 BT using the audio cable” on page 15). The headphones comply with the Bluetooth 2.1 standard.
Putting the PX 210 BT into operation Pairing the PX 210 BT with an audio source 왘 Make sure that your headphones are switched off (see “Switching the PX 210 BT on/off” on page 11). When switching the headphones on for the first time, they will automatically go into pairing mode. The headphones are waiting to be paired with a Bluetooth enabled device (see page 12). 왘 Press the Master button 햶 and keep it pressed until the alternately flashes blue and red.
Putting the PX 210 BT into operation Disconnecting the Bluetooth connection The Bluetooth button 쐋 is backlit, indicating the current setting. The backlighting goes off after a short time to conserve energy. 왘 Press any button on the headphones to display the current setting of the Bluetooth function. To disconnect the Bluetooth connection to the audio source, you can switch off the headphones or the Bluetooth function. This setting is retained until the Bluetooth function is switched on again.
Putting the PX 210 BT into operation Connecting the PX 210 BT using the audio cable Connecting the audio cable You can connect the headphones to the audio source using the audio cable if • • • you do not want to use the Bluetooth function, you are not allowed to use the Bluetooth function (some airlines do not allow Bluetooth transmission) or the battery pack is flat. When the audio cable is connected to the headphones, the Bluetooth function cannot be switched on.
Using the PX 210 BT Using the PX 210 BT Adjusting the PX 210 BT to the listening situation The headphones have a Bluetooth function for wireless connectivity. Depending on the listening situation, you can switch this function on or off. Switching the Bluetooth function on/off Via the Bluetooth interface, the headphones can be connected to a wide variety of Bluetooth enabled devices. To switch the Bluetooth function on: 쐋 왘 Press the Bluetooth button 쐋 and keep it pressed until the flashes 3 times blue.
Using the PX 210 BT Remote-controlling connected devices from the PX 210 BT You can directly remote-control any device supporting the AVRCP profile and connected to the PX 210 BT by using the buttons on the headphones. Please refer to the instruction manual of your audio source for information on whether your device supports the AVRCP profile. If your device does not support the AVRCP profile, you can use an optional dongle.
Using the PX 210 BT Resetting the settings of the PX 210 BT You can reset all settings of your headphones to the factory default settings. This allows you to prevent that other users of the headphones can access your Bluetooth enabled devices. You can then pair 8 new devices with the headphones. 왘 Press the Master button 햶 and keep it pressed until the LED 햲 flashes 3 times red. The headphones switch off (see “Switching the PX 210 BT off” on page 11).
Transporting the PX 210 BT Transporting the PX 210 BT For space-saving transportation, the headphones can be folded up flatly and compactly. 왘 Rotate the ear cups by 90°. DE 왘 Tuck the ear cups between the headband. EN FR IT 왘 Place the headphones flat into the transport case.
Cleaning and maintaining the PX 210 BT Cleaning and maintaining the PX 210 BT Cleaning the PX 210 BT CAUTION! Liquids can damage the electronics of the device! Liquids entering the housing of the device can cause a shortcircuit and damage the electronics. 왘 Keep all liquids far away from the device. 왘 Do not use any cleansing agents or solvents. For reasons of hygiene, you should clean the headphones regularly: 왘 Before cleaning, make sure that the headphones are not recharged via the mains.
If a problem occurs ... If a problem occurs ... Problem Possible cause Solution No operation indicator – headphones cannot be switched on The battery pack is flat. Recharge the battery pack (see page 8). No audio signal when the audio cable is connected The jack plug of the audio cable is not properly connected. No audio signal The headphones are during Bluetooth switched off. connection The headphones are not paired with an audio source.
Accessories and spare parts Accessories and spare parts The following PX 210 BT accessories are available from your specialist dealer: 22 Cat. No. Accessory/spare part 531404 Ear pads, 1 pair 531405 Headband padding, 1 pair 525776 PSC 03R-050 mains unit with 4 country adapters (EU/UK/US/AU) 531406 Audio cable (2.5 mm jack plug to 3.5 mm jack plug) 088526 In-flight adapter (3.5 mm double mono jack) 077046 Audio adapter (3.5 mm jack socket to ¼" (6.
Specifications Specifications Transducer principle dynamic, closed Ear coupling supra-aural Frequency response 15–22,000 Hz Nominal impedance active/passive 590/100 Ω Sound pressure level at 1 kHz and 1 Volt 107 dB SPL THD at 1 kHz < 0.1% Audio connection 3.5 mm stereo jack socket Cable length Audio cable Charging cable DE EN FR 1.4 m 0.8 m Weight 105 g BA 370 PX battery pack Charging time Operating time 3.
apt-X audio coding apt-X audio coding Outstanding audio quality apt-X technology is what wireless audio has been waiting for. With apt-X audio coding, you can be assured of crisp, pure and full stereo sound. It allows you to not only hear, but experience and feel the audio as it was intended. Utilizing apt-X, Bluetooth can now offer wireless audio quality that is indistinguishable from the highest quality wired connection.
apt-X audio coding apt-X key features: • • • • • Blind listening tests with industry reference audiences have shown that apt-X over Bluetooth is indistinguishable from audio delivered over wired technology. Unlike psychoacoustic-based technologies such as MP3 or AAC, apt-X can be used to transport audio without degrading the audio quality. With MPEG/AAC compression, the encoding process is destructive and content perceived as “irrelevant” is discarded.
Manufacturer Declarations Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner.
Manufacturer Declarations This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Manufacturer Declarations Trademarks Sennheiser and NoiseGardTM are registered trademarks of Sennheiser electronic GmbH & Co. KG. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sennheiser electronics GmbH & Co. KG is under license. iPod® and iPhone® are registered trademarks of Apple Computer, Inc.
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Publ.