PXC250-II_US_Internet

Putting the PXC 250-II into operation
7
Inserting and changing the battery
For powering the NoiseGard active noise compensation,
an AAA size battery is required.
왘 Open the battery compartment .
왘 Remove the flat battery (where applies).
왘 Insert a new battery. Observe correct polarity when
inserting the battery.
왘 Close the battery compartment . The cover lock
into place with an audible click.
Connecting the headphones
왘 Connect the audio cable  to the headphone socket
of your audio source.
You hear the sound from your audio source.
왘 Slip on the in-flight adapter  if you wish to use
the headphones with the in-flight entertainment
system of the aircraft.
For best product performance, we recommend
using a standard battery instead of a rechargeable
battery.

Music
Photos
Videos
Extras
Settings
Shuffle Songs
쐋쐋
PXC250-II.book Seite 7 Montag, 18. April 2011 12:38 12