Instruction manual PXC 550-II
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the headphones
- Information on the rechargeable battery and the charging process
- Charging the headphones' rechargeable battery
- Connecting the headphones to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the headphones with a Bluetooth device
- Disconnecting the headphones from a Bluetooth device
- Installing the Smart Control app
- Switching the headphones on
- Switching the headphones off
- Putting the headphones on and adjusting the headband
- Retrieving information on the battery charge status
- Adjusting the volume
- Information on active noise cancellation ANC
- Activating/deactivating the active noise cancellation ANC
- Setting the ANC USER mode
- Listening of ambient noise or conversations - activating/deactivating the Transparent Hearing function
- Listening to music using the headphones
- Controlling music playback
- Making phone calls using the headphones
- Using the voice assistant/voice dialing
- Using Amazon Alexa as voice assistant
- Using the Smart Pause function
- Adjusting sound effects/the equalizer
- Activates/deactivates the call enhancement function
- Setting the voice prompts/beep sounds
- Using the audio cable/activating flight mode
- Connecting the headphones using the audio cable
- Using the in-flight adapter
- Connecting the headphones using the USB cable
- Deactivating Bluetooth/activating the flight mode
- Storing and transporting the headphones
- Care and maintenance
- FAQ/If a problem occurs ...
- Specifications
- Manufacturer Declarations
Using the headphones
14 | PXC 550-II
Connecting the headphones to a
Bluetooth device
To be able to use the Bluetooth connection, you must register both
devices (headphones and e.g. smartphone) once. This process is
called pairing.
If operation differs from the steps mentioned, also refer to the
instruction manual of the Bluetooth device you are using.
Information on the Bluetooth wireless
connection
The headphones are compatible with Bluetooth 5.0.
If your audio source supports one of the following high-resolution
audio encoding methods, music is automatically played in high audio
quality: aptX, aptX LL or AAC. Otherwise the headphones will play
your music in normal audio quality (SBC).
Paired devices establish the Bluetooth wireless connection immedi-
ately after switch-on and are ready for use.
On switch-on, the headphones automatically try to connect to the
last two connected Bluetooth devices. The headphones can save the
connection profiles of up to eight Bluetooth devices with which they
have been paired. Audio playback is only possible from one device at
a time.
If you pair the headphones with the ninth Bluetooth device, the saved
connection profile of the least used Bluetooth device will be over
-
written. If you want to re-establish a connection with the overwritten
Bluetooth device, you have to pair the headphones again.
When you switch on the headphones for the first time, they
automatically switch to pairing mode.
Paired and connected Bluetooth device
Paired Bluetooth device (currently not connected)