Instruction manual PXC 550-II
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the headphones
- Information on the rechargeable battery and the charging process
- Charging the headphones' rechargeable battery
- Connecting the headphones to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the headphones with a Bluetooth device
- Disconnecting the headphones from a Bluetooth device
- Installing the Smart Control app
- Switching the headphones on
- Switching the headphones off
- Putting the headphones on and adjusting the headband
- Retrieving information on the battery charge status
- Adjusting the volume
- Information on active noise cancellation ANC
- Activating/deactivating the active noise cancellation ANC
- Setting the ANC USER mode
- Listening of ambient noise or conversations - activating/deactivating the Transparent Hearing function
- Listening to music using the headphones
- Controlling music playback
- Making phone calls using the headphones
- Using the voice assistant/voice dialing
- Using Amazon Alexa as voice assistant
- Using the Smart Pause function
- Adjusting sound effects/the equalizer
- Activates/deactivates the call enhancement function
- Setting the voice prompts/beep sounds
- Using the audio cable/activating flight mode
- Connecting the headphones using the audio cable
- Using the in-flight adapter
- Connecting the headphones using the USB cable
- Deactivating Bluetooth/activating the flight mode
- Storing and transporting the headphones
- Care and maintenance
- FAQ/If a problem occurs ...
- Specifications
- Manufacturer Declarations
Using the headphones
PXC 550-II | 15
Pairing the headphones with a Bluetooth
device
1. Switch the headphones on (> 17) and place them close to the Blue-
tooth device (max. 20 cm).
Make sure that Bluetooth is activated (Bluetooth on/off switch is
set to “I” and no audio cable is connected to the headphones).
2. Press and hold the voice assistant button for 4 seconds until you
hear the voice prompt “Pairing”.
The LEDs flash white one after the other. The headphones are in
pairing mode.
3. Activate Bluetooth on your Bluetooth device.
4. Via the menu of your Bluetooth device, start the search for new
Bluetooth devices.
All active Bluetooth devices in the proximity of your Bluetooth
device are displayed.
5. From the list of found Bluetooth devices, select “PXC 550-II”. If
necessary, enter the default pin code “0000”.
If pairing was successful, you hear the voice prompts “Pairing
successful” and “Device (1) connected”. The LED flashes white 3
times.
If no connection is established within 5 minutes, pairing mode
is terminated and the headphones switch to standby mode. If
necessary, repeat the steps described above.
If you switch on the headphones for the first time (the pairing
list is empty), they automatically switch to pairing mode.
Menu
Bluetooth on
Bluetooth off
1
4 5
3
PXC 550-II
Keyword: 0000
20 cm
Menu
Add Device
Bluetooth switch
ON
3x
“Pairing“
“Pairing
successful“
“Device (1)
connected“
4s
Hold
2