Instruction manual
Table Of Contents
- Important safety information
- The RS 165 digital wireless headphone system
- Package includes
- Product overview
- Putting the RS 165 into operation
- Setting up the transmitter
- Connecting the transmitter to an audio source
- Connecting the transmitter to an AC wall outlet
- Replacing and inserting the rechargeable batteries
- Charging the rechargeable batteries
- Adjusting the headband
- Using the RS 165 headphone system
- Switching your wireless headphone system on
- Adjusting the volume
- Muting/unmuting the headphones
- Activating/deactivating the dynamic bass boost
- Pairing headphones to the transmitter
- Switching your wireless headphones off
- Cleaning and maintaining the RS 165
- Troubleshooting
- Specifications
- Manufacturer declarations
Putting the RS 165 into operation
RS 165
| 21
Using the RS 165 headphone system
Switching your wireless headphone system on
1 Switch your audio source on.
If you are using the headphone socket (see page 15) to connect to your
audio source, adjust the volume of the headphone socket on your audio
source (e.g. TV) to at least the medium level.
2 Press and hold the HDR power button for approx. 2 seconds to switch
the headphones on.
The transmitter in standby mode recognizes the active paired head-
phones and automatically transmits a signal. The status LEDs on the
transmitter and the headphones light up green.
WARNING
Danger due to high volume levels!
Listening at high volume levels can lead to permanent hearing
defects.
왘 Before putting the headphones on, adjust the volume on the
headphones to a low level.
왘 Do not expose yourself to high volume levels for long periods of
time.
VOLUME
If the headphones are brought outside the transmission range or if
there is no audio signal received from the transmitter for more than
5 minutes, the headphones switch off automatically.
2s
AUTO-ON
1
2
ON
ON