Instruction manual
Table Of Contents
- Important safety information
- The RS 165 digital wireless headphone system
- Package includes
- Product overview
- Putting the RS 165 into operation
- Setting up the transmitter
- Connecting the transmitter to an audio source
- Connecting the transmitter to an AC wall outlet
- Replacing and inserting the rechargeable batteries
- Charging the rechargeable batteries
- Adjusting the headband
- Using the RS 165 headphone system
- Switching your wireless headphone system on
- Adjusting the volume
- Muting/unmuting the headphones
- Activating/deactivating the dynamic bass boost
- Pairing headphones to the transmitter
- Switching your wireless headphones off
- Cleaning and maintaining the RS 165
- Troubleshooting
- Specifications
- Manufacturer declarations
Putting the RS 165 into operation
24 | RS 165
Pairing headphones to the transmitter
The headphones and the transmitter enclosed in this package have been
paired from the factory. The following procedure is only necessary if you
have cleared all pairing information from your wireless headphone system
and you want to revive the lost pairing, or if you want to pair another set
of headphones to the transmitter.
You can connect up to 2 paired headphones simultaneously with your
TR
165 transmitter.
왘 Place the headphones on the headphones holder of the transmitter for
a second.
The Charge status LED on the transmitter lights up red. The
headphones are paired to the transmitter.
1s