RS 4200 II RS 4200-2 II RF wireless stereo stethoset headphone system Instruction manual
A 4 3 2 1
B 7 6 5 8 9 0 A B D C
C I A B E F C G H
Contents Contents Important safety instructions ............................................ 2 Delivery includes .................................................................. 5 RS 4200-2 II product variant ............................................ 5 Operating controls ............................................................... 6 Receiver ................................................................................ 6 Transmitter ................................................................
Important safety instructions Important safety instructions 왘 Please read this instruction manual carefully and com- pletely before using the product. 왘 Make this instruction manual available to all users at all times. In order to prevent damage to health: 왘 Before using the product, set the volume to a low level. To protect your hearing, avoid listening at high volume levels for long periods of time.
Important safety instructions In order to prevent damage to the product: 왘 Only use attachments/accessories specified by Sennheiser. 왘 Switch off the product after use to conserve battery power. Remove the rechargeable batteries if the product will not be used for extended periods of time. 왘 Do not place the product on delicate surfaces. 왘 Always keep the product dry and do not expose it to extreme temperatures (hairdryer, heater, extended exposure to sunlight, etc.).
Important safety instructions 4 | RS 4200 II Keep away from children. When not using the product for extended periods of time, remove the rechargeable batteries from the product. Immediately remove rechargeable batteries from an obviously defective product. Only use rechargeable batteries specified by Sennheiser. Dispose of rechargeable batteries at special collection points or return it to your specialist dealer.
Delivery includes Delivery includes RR 4200 stethoset receiver TR 4200 transmitter with integrated charging compartment BA 300 Lithium-Ion rechargeable battery Mains unit Connection cable fitted with two 3.5 mm stereo jack plugs for connection to headphone socket (with one adapter to 1/4“ (6.3 mm) jack socket) Adapter RCA/jack socket for connection to RCA sockets (e.g.
Operating controls Operating controls The overview pictures of the receiver and the transmitter can be found on the inside front cover of this instruction manual. A Receiver 1 2 3 4 Volume control Compartment for BA 300 rechargeable battery Balance control TUNE button B Transmitter 5 3.
Putting the system into operation Putting the system into operation Setting up the transmitter 왘 Choose a suitable place near your sound source (e.g. TV). 왘 Do not place the transmitter close to metal objects such as shelf bars, reinforced concrete walls, etc. as this can decrease the transmitter’s range. It is not necessary that the transmitter and stethoset receiver are in a direct line of sight, so you can move around freely in the home or outside in the garden.
Putting the system into operation A F t oucket so dio e audphon hea Connecting the transmitter via the headphone socket 왘 Plug in the other end of the connection cable E to the E headphone socket on your sound source. 왘 Adjust the volume of the headphone socket on your sound source to a medium level. This improves the quality of wireless sound transmission. If necessary, check the menu setting of your TV. With most TVs, the headphone socket is located at the front or sides.
Putting the system into operation C Connecting the transmitter via the SCART socket If your sound source has a SCART socket, you can order the suitable SCART adapter from your Sennheiser dealer. 왘 Connect the connection cable E to the SCART adapter H. 왘 Plug in the SCART adapter H to the SCART socket on your TV. If your TV has several SCART sockets, select a SCART socket that is also an output (for details, see operating manual of your TV).
Putting the system into operation Inserting and removing the receiver’s rechargeable battery The receiver is delivered with the battery inserted. 왘 Insert the battery into the compartment 2 as shown on the left. Make sure that the battery is inserted correctly. 왘 To remove the battery, use the finger catch projection to pull the battery out of the receiver.
Using the system components Using the system components Switching the transmitter on/off To switch the transmitter on: 왘 Switch your sound source on. This automatically switches on the transmitter and the LED D lights up green. If the transmitter does not switch on, increase the volume of your sound source. To switch the transmitter off: 왘 Switch your sound source off. The transmitter automatically switches off after 3 minutes. The LED D goes off.
Using the system components Adjusting the volume If the transmitter is connected to a headphone socket of your sound source: 왘 Adjust the volume of the sound source to a medium level. This improves the quality of wireless sound transmission. 왘 Use the volume control 1 to adjust the volume to a sufficient and comfortable level. 1 Automatic transmitter search tuning 왘 Put the receiver on. The receiver starts searching for a transmitter signal and automatically tunes itself to the last selected channel.
Using the system components Enhancing the speech intelligibility The button 8 allows you to enhance the speech intelligibility. 왘 If the speech is barely intelligible, press the button 8. The button 8 is backlit in yellow and the speech intelligibility is enhanced. 왘 If the speech remains barely intelligible, increase the volume of your sound source.
Meaning of the LEDs and acoustic signals Meaning of the LEDs and acoustic signals LEDs on the transmitter LED Operation indication D Status Meaning lit green Transmitter is switched on off Transmitter is switched off Charging control LED of lit red receiver rechargeable battery C Charging control LED of spare lit green rechargeable battery B Spare rechargeable battery or rechargeable battery is being charged Speech intelligibility button 8 Speech enhancement is activated lit yellow Rechargeable
Care and maintenance Care and maintenance Cleaning the system CAUTION Liquids can damage the electronics of the devices! Liquids entering the housing of the units can cause a shortcircuit and damage the electronics. 왘 Keep all liquids far away from the devices. 왘 Before cleaning, disconnect the transmitter from the mains. 왘 Only use a slightly damp cloth to clean the devices. Do not use any cleansing agents or solvents.
If a problem occurs... If a problem occurs...
Specifications Specifications System Modulation FM stereo Carrier frequencies 863.3 / 864.0 / 864.7 MHz Range up to 100 m in the open AF frequency response 50 Hz–16 kHz THD < 1% Signal-to-noise ratio typ. 70 dB(A) Transmitter Audio/microphone connection 3.5 mm stereo jack socket Charging time of rechargeable battery approx. 3 hrs Power supply for transmitter 9 VDC/300 mA via NT09-3A mains unit Power supply for NT09-3A mains unit 100–200 V~/50–60 Hz/ max.
Manufacturer Declarations In compliance with Europe: EMC Radio Safety EN 301489-1/-9 EN 301357-1/-2 EN 60065 Transmitters that operate in the 863 – 865 MHz frequency range can be used licence-free in the following countries: AT, BA, BE, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, IE, IS, IT, LI, LT, LU, LV, ME, MK, MT, NL, NO, PL, PT, RO, RS, SE, SI, SK, TR, UA. Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product.
RS 4200 II RS 4200-2 II RF wireless stereo stethoset headphone system Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in China, Publ.
